foratvise
Get Started
Idling and minor stops (micro-stops)

Final Folder Jam/Stoppage

Idling and minor stops (micro-stops)PerformancePackaging (forming, sealing, wrapping, case packing, palletizing)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 53 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

The final folder, the mechanism that closes or folds the trailing flaps of a carton, case or wrap at the downstream end of the packaging machine, stalls when a flap misaligns, a blank is skewed, or product protrudes beyond the fold line. The folding fingers, belts or plows then jam against the misplaced material instead of completing the fold, halting the unit until the obstruction is cleared.

What is done about it

Standard practice is to clear the jam, realign the flap or blank guides, and verify fold-finger timing and sensor detection of flap position; preventive measures include adjusting guide rails for product/format variability and scheduling periodic inspection of folding tooling wear.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
53% [41–66%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.2%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.8%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]14 studies
  • Bakery and pasta
    0.6% [0.1–2.5%]6 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.4%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.2%]4 studies
  • Grain and oilseed milling
    0.6% [0.1–2.4%]4 studies
  • Sugar and confectionery
    0.6% [0.1–2.5%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]8 studies
  • Animal feed and pet food
    0.6% [0.1–2.5%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The final folder, the mechanism that closes or folds the trailing flaps of a carton, case or wrap at the downstream end of the packaging machine, stalls when a flap misaligns, a blank is skewed, or product protrudes beyond the fold line. The folding fingers, belts or plows then jam against the misplaced material instead of completing the fold, halting the unit until the obstruction is cleared.

How it looks in SCADA data

Engineering guidance

MES/SCADA logs show frequent short-duration stop events localized to the final folder station, often tagged with a jam or fold-fault alarm, while upstream stations continue running and trigger blocking back-pressure. Machine-state logs record repeated manual-clear or reset cycles with low individual downtime but high event count.

Countermeasure

Engineering guidance

Standard practice is to clear the jam, realign the flap or blank guides, and verify fold-finger timing and sensor detection of flap position; preventive measures include adjusting guide rails for product/format variability and scheduling periodic inspection of folding tooling wear.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 152 Sec/shift · as reported: “Final folder”
    Show verbatim quote
    Average wasted time Per Shift (Sec/shift) 0 - 152 116
  2. Lost time: 286 Sec/shift · as reported: “Final folder”
    Show verbatim quote
    Average wasted time Per Shift (Sec/shift) 1712 - 286 192
  3. Lost time: 286 Minutes · as reported: “Final folder”
    Show verbatim quote
    Final folder 286 Waiting / Rework
  4. Lost time: 9.12 ton · as reported: “Final folder”
    Show verbatim quote
    Average waste Per Month (Ton/Month) 9.120