foratvise
Get Started
Equipment failure (breakdowns)

Helical screw conveyor failure

Equipment failure (breakdowns)AvailabilityConveying and accumulation

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 59 % of the line's lost time. Reported by 2 of the 86 studies that could observe it (sparse evidence).

What happens

The helical screw (helix) that moves product or containers along the conveyor section loses mechanical integrity due to wear, fatigue, misalignment, bearing or drive-shaft failure, or jamming by foreign material, which stops or degrades its rotation. This interrupts the transport function and requires a maintenance intervention to repair or replace the affected component before the conveyor can resume normal operation.

What is done about it

Implement scheduled inspection and lubrication of bearings, drive shaft and helix flighting, with vibration or current monitoring to detect wear before failure, and install guarding or magnetic/metal detection to prevent foreign-material jams. When failure occurs, perform root-cause repair (shaft alignment, bearing replacement, or flighting refurbishment) rather than temporary fixes to avoid recurrence.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–1.8%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
59% [48–69%]
Studies / units
86 / 112
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–2.8%]11 studies
  • Soft drinks, bottled water and juices
    0.9% [0.1–2.9%]28 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.8%]12 studies
  • Bakery and pasta
    0.8% [0.1–3.1%]0 studies
  • Meat, poultry and seafood
    0.8% [0.1–2.9%]5 studies
  • Fruit and vegetable processing
    0.8% [0.1–2.9%]4 studies
  • Grain and oilseed milling
    0.8% [0.1–3.0%]4 studies
  • Sugar and confectionery
    0.8% [0.1–3.0%]4 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–2.9%]4 studies
  • Animal feed and pet food
    0.8% [0.1–2.9%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–2.9%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The helical screw (helix) that moves product or containers along the conveyor section loses mechanical integrity due to wear, fatigue, misalignment, bearing or drive-shaft failure, or jamming by foreign material, which stops or degrades its rotation. This interrupts the transport function and requires a maintenance intervention to repair or replace the affected component before the conveyor can resume normal operation.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show the helix drive motor fault or overload alarm, motor current spike followed by trip, or a sustained drop to zero conveyor speed/output while upstream and downstream stations show starvation or blocking. The equipment state log records an unplanned stop event attributed to the conveying station, often correlated with a maintenance work order and extended downtime duration.

Countermeasure

Engineering guidance

Implement scheduled inspection and lubrication of bearings, drive shaft and helix flighting, with vibration or current monitoring to detect wear before failure, and install guarding or magnetic/metal detection to prevent foreign-material jams. When failure occurs, perform root-cause repair (shaft alignment, bearing replacement, or flighting refurbishment) rather than temporary fixes to avoid recurrence.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 72.0 events · as reported: “Helix”
    Show verbatim quote
    HELİX | Helix | 72
  2. Number of events: 72.0 events · as reported: “Helix”
    Show verbatim quote
    HELİX | Helix | 72