foratvise
Get Started
Process defects (scrap and rework)

Inadequate real-time detection of defective materials

Process defects (scrap and rework)QualityWhole line or unspecified equipment

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 0 of the 127 studies that could observe it (sparse evidence).

What happens

The line lacks sensors, vision systems or control logic capable of identifying nonconforming raw materials or in-process product as they move through the process, so defects are only discovered after the fact or not at all. This allows defective units to continue being processed, mix with good product, or accumulate before any corrective action is taken.

What is done about it

Install or upgrade inline inspection such as vision, weight, metal or seal detection with closed loop automatic rejection, calibrate detection thresholds to current product specifications, and integrate inspection data into the MES or SCADA so operators receive immediate alerts and traceable rejection records.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.1%]
Expected share of lost time
0.2% [0.0–0.5%]
Share of lost time when present
48% [36–59%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.6%]13 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.5%]26 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.7%]11 studies
  • Bakery and pasta
    0.4% [0.0–1.5%]24 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.6%]9 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.8%]7 studies
  • Grain and oilseed milling
    0.5% [0.0–1.8%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.7%]9 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.6%]5 studies
  • Animal feed and pet food
    0.4% [0.0–1.7%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.7%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The line lacks sensors, vision systems or control logic capable of identifying nonconforming raw materials or in-process product as they move through the process, so defects are only discovered after the fact or not at all. This allows defective units to continue being processed, mix with good product, or accumulate before any corrective action is taken.

How it looks in SCADA data

Engineering guidance

Inspection or vision stations show few or no automatic reject events despite a rising trend in downstream scrap, rework or complaint counters; there is a discrepancy between manual quality checks and automatic system flags; defect classification appears only in end-of-shift quality logs rather than as real-time alarms correlated with production timestamps.

Countermeasure

Engineering guidance

Install or upgrade inline inspection such as vision, weight, metal or seal detection with closed loop automatic rejection, calibrate detection thresholds to current product specifications, and integrate inspection data into the MES or SCADA so operators receive immediate alerts and traceable rejection records.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 4.72 % · as reported: “Deficiente detección y control en tiempo real de materiales defectuosos”
    Show verbatim quote
    Deficiente detección y control en tiempo real de materiales defectuosos. 1097.04 4.72% 85.59%
  2. Lost time: 1,097 min · as reported: “Deficiente detección y control en tiempo real de materiales defectuosos”
    Show verbatim quote
    Deficiente detección y control en tiempo real de materiales defectuosos. 1097.04 4.72% 85.59%
  3. Number of events: 7,660 units · as reported: “Deficiente detección y control en tiempo real de materiales defectuosos”
    Show verbatim quote
    Alrededor de 7660 unidades se desecharon en el año 2023 debido a esta causa.