foratvise
Get Started
Equipment failure (breakdowns)

Ingredient dosing station failure or jam

Equipment failure (breakdowns)AvailabilityMixing and blending

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 31 studies that could observe it (sparse evidence).

What happens

Dosing equipment that meters bulk ingredients such as meals, grains or oils into the batching or mixing process fails or jams because of mechanical wear, auger or valve blockage, material bridging or sticking, or weighing cell drift. The fault can appear at any of the multiple dosing entry points feeding a common mixer, each handling a different ingredient stream.

What is done about it

Apply preventive maintenance to augers, valves, agitators and weighing cells, install anti-bridging or anti-caking devices and vibrators on hoppers prone to sticking, and use blockage or no-flow sensors to trigger early alarms before a full stop. Standardize quick-clear procedures and spare parts for each dosing entry to minimize intervention time.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.0% [0.2–3.1%]
Expected share of lost time
0.6% [0.1–1.8%]
Share of lost time when present
57% [46–67%]
Studies / units
31 / 40
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.1% [0.1–4.2%]6 studies
  • Soft drinks, bottled water and juices
    1.2% [0.1–4.5%]2 studies
  • Brewing, wine and spirits
    1.2% [0.1–4.7%]0 studies
  • Bakery and pasta
    1.1% [0.1–4.2%]2 studies
  • Meat, poultry and seafood
    1.2% [0.1–4.9%]1 study
  • Fruit and vegetable processing
    1.2% [0.1–4.5%]2 studies
  • Grain and oilseed milling
    1.2% [0.1–5.2%]0 studies
  • Sugar and confectionery
    1.2% [0.1–4.5%]3 studies
  • Snacks, coffee, tea and other foods
    1.1% [0.1–4.5%]3 studies
  • Animal feed and pet food
    1.7% [0.2–6.0%]5 studies
  • Food manufacturing (unspecified or mixed)
    1.1% [0.1–4.4%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Dosing equipment that meters bulk ingredients such as meals, grains or oils into the batching or mixing process fails or jams because of mechanical wear, auger or valve blockage, material bridging or sticking, or weighing cell drift. The fault can appear at any of the multiple dosing entry points feeding a common mixer, each handling a different ingredient stream.

How it looks in SCADA data

Engineering guidance

SCADA shows a dosing-point alarm or fault state, a stalled or frozen weight signal on the load cell associated with that entry, abnormal motor current (spike then trip or sustained overload) on the feeder drive, and the downstream mixer cycle held in wait-for-ingredient state. Repeated short stop counters cluster on specific dosing entries rather than on the mixer itself.

Countermeasure

Engineering guidance

Apply preventive maintenance to augers, valves, agitators and weighing cells, install anti-bridging or anti-caking devices and vibrators on hoppers prone to sticking, and use blockage or no-flow sensors to trigger early alarms before a full stop. Standardize quick-clear procedures and spare parts for each dosing entry to minimize intervention time.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 0.109 Kg.h-1 · as reported: “Dosing (oils)”
    Show verbatim quote
    9Dosing 8.35 0.013 ± 0.003 0.109 ± 0.025 Kg 1.36
  2. Lost time: 0.549 Kg.h-1 · as reported: “Dosing (animal meals, first entry)”
    Show verbatim quote
    4Dosing 8.35 0.066 ± 0.022 0.549 ± 0.184 Kg 6.85
  3. Lost time: 0.314 Kg.h-1 · as reported: “Dosing (animal meals, second entry)”
    Show verbatim quote
    4Dosing 8.35 0.038 ± 0.010 0.314 ± 0.084 Kg 3.92
  4. Lost time: 0.498 Kg.h-1 · as reported: “Dosing (animal meals, third entry)”
    Show verbatim quote
    4Dosing 8.35 0.060 ± 0.025 0.498 ± 0.219 Kg 6.22
  5. Lost time: 1.24 Kg.h-1 · as reported: “Dosing (vegetal meals)”
    Show verbatim quote
    2Dosing 8.35 0.148 ± 0.050 1.240 ± 0.428 Kg 15.48
  6. Lost time: 0.888 Kg.h-1 · as reported: “Dosing (corn)”
    Show verbatim quote
    3Dosing 8.35 0.106 ± 0.034 0.888 ± 0.284 Kg 11.08
  7. Lost time: 0.146 Kg.h-1 · as reported: “Dosing (oils, second entry)”
    Show verbatim quote
    2Dosing 8.35 0.017 ± 0.005 0.146 ± 0.042 Kg 1.82
  8. Lost time: 0.176 Kg.h-1 · as reported: “Dosing (animal meals, fourth entry)”
    Show verbatim quote
    4Dosing 8.35 0.021 ± 0.007 0.176 ± 0.058 Kg 2.19
  9. Lost time: 9.00 h · as reported: “Dosing table jam”
    Show verbatim quote
    Atasco mesa dosificado 9,00 57%