foratvise
Get Started
Equipment failure (breakdowns)

Inkjet printer failure

Equipment failure (breakdowns)AvailabilityLabeling and coding

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 2 of the 85 studies that could observe it (limited evidence).

What happens

The inkjet coding unit stops functioning correctly due to internal faults such as clogged nozzles, ink or solvent system malfunctions, print head electronic faults, or control board errors, preventing it from printing codes on packs or containers. The line halts or runs without coding until a technician intervenes to clear the fault.

What is done about it

Implement a preventive maintenance program covering nozzle cleaning, ink and solvent filter replacement, and periodic inspection of the print head and control electronics. Maintain spare print heads and key components on hand and train operators in basic troubleshooting and quick-clear procedures to minimize downtime.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.3%]
Expected share of lost time
0.5% [0.1–1.3%]
Share of lost time when present
57% [45–67%]
Studies / units
85 / 113
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.0% [0.1–3.5%]11 studies
  • Soft drinks, bottled water and juices
    1.5% [0.3–4.4%]29 studies
  • Brewing, wine and spirits
    1.0% [0.1–3.4%]13 studies
  • Bakery and pasta
    1.1% [0.1–4.0%]1 study
  • Meat, poultry and seafood
    1.0% [0.1–3.7%]4 studies
  • Fruit and vegetable processing
    1.0% [0.1–3.6%]4 studies
  • Grain and oilseed milling
    1.1% [0.1–3.8%]3 studies
  • Sugar and confectionery
    1.0% [0.1–3.6%]3 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–3.8%]4 studies
  • Animal feed and pet food
    1.0% [0.1–3.5%]4 studies
  • Food manufacturing (unspecified or mixed)
    1.0% [0.1–3.5%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The inkjet coding unit stops functioning correctly due to internal faults such as clogged nozzles, ink or solvent system malfunctions, print head electronic faults, or control board errors, preventing it from printing codes on packs or containers. The line halts or runs without coding until a technician intervenes to clear the fault.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs a specific fault or alarm code associated with the inkjet printer, often accompanied by a machine-state change to fault or stopped, with print-verification or vision-check failures rising just before the stop. Downstream equipment may show starvation while the printer is offline for repair.

Countermeasure

Engineering guidance

Implement a preventive maintenance program covering nozzle cleaning, ink and solvent filter replacement, and periodic inspection of the print head and control electronics. Maintain spare print heads and key components on hand and train operators in basic troubleshooting and quick-clear procedures to minimize downtime.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 273 min · as reported: “Problem in the inkjet printer (code 6004)”
    Show verbatim quote
    the company spent 245 and 273 minutes to repair the equipment between the studied days 04 and 05.
  2. Lost time: 245 min · as reported: “Problem in the inkjet printer (code 6004)”
    Show verbatim quote
    the company spent 245 and 273 minutes to repair the equipment between the studied days 04 and 05.
  3. Share of loss events: 9.00 % · as reported: “Ink jet printer failures”
    Show verbatim quote
    70% das paradas de linha estavam relacionadas a problemas no equipamento da Klockner, 16% por problemas de fornecimento de energia e 9% por problemas na máquina de injetora de tinta