Mill scraper breakage
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 43 studies that could observe it (sparse evidence).
What happens
The scraper blade that clears product from the mill's internal surfaces suffers fatigue, wear or impact from foreign material and fractures or detaches. Without the scraper clearing it, product accumulates and packs against the rotating elements, jamming the mill and stalling the drive.
What is done about it
Apply scheduled inspection and replacement of scraper blades based on wear condition, use wear-resistant or impact-tolerant materials, and install upstream magnetic or metal separation to prevent foreign objects from reaching the scraper.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.8%]
- Expected share of lost time
- 0.3% [0.0–1.0%]
- Share of lost time when present
- 57% [45–68%]
- Studies / units
- 43 / 48
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.7% [0.1–2.8%]5 studies
- Soft drinks, bottled water and juices0.7% [0.1–2.7%]1 study
- Brewing, wine and spirits0.7% [0.1–2.9%]0 studies
- Bakery and pasta0.7% [0.1–3.0%]0 studies
- Meat, poultry and seafood0.7% [0.1–2.8%]0 studies
- Fruit and vegetable processing0.7% [0.1–2.9%]2 studies
- Grain and oilseed milling0.7% [0.1–2.9%]7 studies
- Sugar and confectionery0.6% [0.1–2.5%]10 studies
- Snacks, coffee, tea and other foods0.7% [0.1–2.8%]5 studies
- Animal feed and pet food0.7% [0.1–2.6%]6 studies
- Food manufacturing (unspecified or mixed)0.7% [0.1–2.5%]7 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe scraper blade that clears product from the mill's internal surfaces suffers fatigue, wear or impact from foreign material and fractures or detaches. Without the scraper clearing it, product accumulates and packs against the rotating elements, jamming the mill and stalling the drive.
How it looks in SCADA data
Engineering guidanceDrive motor current or torque rises sharply before tripping on overload, followed by a mill fault or jam alarm and a sustained stopped-state duration until maintenance clears it. Upstream equipment shows blocking while downstream stages show starvation during the stop.
Countermeasure
Engineering guidanceApply scheduled inspection and replacement of scraper blades based on wear condition, use wear-resistant or impact-tolerant materials, and install upstream magnetic or metal separation to prevent foreign objects from reaching the scraper.
4Sources
- Reliability Measurement of Torque Transmission System for Spice Manufacturing Plant (2019)Open sourceLost time: 1.00 Hr · as reported: “V1: Mill jammed/1 unit scrapper broken”
Show verbatim quote
12/28/16 017504 V1: Mill jammed/ 1 unit scrapper broken CMU 0 1 1

