foratvise
Get Started
Process defects (scrap and rework)

Missing product code/date stamp

Process defects (scrap and rework)QualityLabeling and coding

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 47 % of the line's lost time. Reported by 0 of the 85 studies that could observe it (sparse evidence).

What happens

The coding device (inkjet, laser or thermal printer) fails to deposit the required batch, date or lot code on the package due to a clogged nozzle, depleted ink or ribbon, a missed trigger signal, or incorrect timing relative to package passage. The affected units proceed through the line without the mandatory code and are classified as non-conforming at inspection, since regulatory and traceability requirements are not met even though the package itself is otherwise acceptable.

What is done about it

Install an inline print-quality verification camera linked to an automatic reject diverter so that uncoded units are removed before packing, and configure a line interlock that halts the coder or the line when consecutive missing-code events are detected. Maintain the printer through scheduled nozzle cleaning, ink/ribbon level monitoring and preventive replacement of consumables, and validate trigger sensor alignment during changeovers.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.3%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
47% [35–59%]
Studies / units
85 / 113
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.5% [0.0–1.8%]11 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.6%]29 studies
  • Brewing, wine and spirits
    0.5% [0.0–1.9%]13 studies
  • Bakery and pasta
    0.5% [0.0–2.0%]1 study
  • Meat, poultry and seafood
    0.5% [0.0–1.9%]4 studies
  • Fruit and vegetable processing
    0.5% [0.0–2.0%]4 studies
  • Grain and oilseed milling
    0.5% [0.0–2.0%]3 studies
  • Sugar and confectionery
    0.5% [0.0–1.9%]3 studies
  • Snacks, coffee, tea and other foods
    0.5% [0.0–1.9%]4 studies
  • Animal feed and pet food
    0.5% [0.0–2.0%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.5% [0.0–2.0%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The coding device (inkjet, laser or thermal printer) fails to deposit the required batch, date or lot code on the package due to a clogged nozzle, depleted ink or ribbon, a missed trigger signal, or incorrect timing relative to package passage. The affected units proceed through the line without the mandatory code and are classified as non-conforming at inspection, since regulatory and traceability requirements are not met even though the package itself is otherwise acceptable.

How it looks in SCADA data

Engineering guidance

Vision or code-verification stations log repeated 'no code detected' or 'illegible code' faults, printer fault counters and ink/ribbon-low alarms increase, and the reject counter at the inspection or checkweigher station rises without a corresponding stop in upstream equipment. Printer status tags may show intermittent communication dropouts or missed trigger counts correlated with the defect spikes.

Countermeasure

Engineering guidance

Install an inline print-quality verification camera linked to an automatic reject diverter so that uncoded units are removed before packing, and configure a line interlock that halts the coder or the line when consecutive missing-code events are detected. Maintain the printer through scheduled nozzle cleaning, ink/ribbon level monitoring and preventive replacement of consumables, and validate trigger sensor alignment during changeovers.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of loss events: 8.80 % · as reported: “Missing coding (koding hilang)”
    Show verbatim quote
    Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
  2. Number of events: 30.0 bungkus · as reported: “Missing coding (koding hilang)”
    Show verbatim quote
    Koding Hilang 30 85 9 10 71
  3. Number of events: 85.0 bungkus · as reported: “Missing coding (koding hilang)”
    Show verbatim quote
    Koding Hilang 30 85 9 10 71
  4. Number of events: 9.00 bungkus · as reported: “Missing coding (koding hilang)”
    Show verbatim quote
    Koding Hilang 30 85 9 10 71
  5. Number of events: 10.0 bungkus · as reported: “Missing coding (koding hilang)”
    Show verbatim quote
    Koding Hilang 30 85 9 10 71
  6. Number of events: 71.0 bungkus · as reported: “Missing coding (koding hilang)”
    Show verbatim quote
    Koding Hilang 30 85 9 10 71