Included study
Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan
1Bibliographic record
- Authors
- Susilo Adhi, Andhika Mayasari, Sulung Rahmawan Wira Ghani, Nur Muflihah
- Year
- 2025
- Venue
- Jurnal Penelitian Bidang Inovasi & Pengelolaan Industri
- DOI
- —
- Country
- Indonesia
- Segment
- Snacks, coffee, tea and other foods
- Process family
- Filling and packaging line
- Study type
- Single case study
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · — machines
- Observation period
- 135 days
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
CV.XYZ sebagai mitra dari beberapa partner, menghadapi persoalan terkait tingginya tingkat kerusakan kemasan pada produk kualitas kemasan yang melampaui batas toleransi mencapai 11,01%
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 10Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
Center seal detached (center seal lekang)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 10.3 % | Both extractors agreed |
Long seal detached (longseal lekang)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 9.30 % | Both extractors agreed |
Wrinkled seal (seal berkerut)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 7.40 % | Both extractors agreed |
Slip packaging (kemasan selip)Show verbatim quote (Hasil dan Pembahasan - Check Sheet)Data menunjukkan bahwa jenis kerusakan dengan frekuensi tertinggi selama periode Juli hingga November 2024 adalah kemasan melipat 406 bungkus, kemasan selip sebesar 357 bungkus, dan kemasan jepret sesbesar 390 bungkus. | Process defects (scrap and rework) | Number of events | 357 bungkus | Both extractors agreed |
Slip packaging (kemasan selip)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 16.7 % | Both extractors agreed |
Folding packaging (kemasan melipat)Show verbatim quote (Hasil dan Pembahasan - Check Sheet)Data menunjukkan bahwa jenis kerusakan dengan frekuensi tertinggi selama periode Juli hingga November 2024 adalah kemasan melipat 406 bungkus, kemasan selip sebesar 357 bungkus, dan kemasan jepret sesbesar 390 bungkus. | Process defects (scrap and rework) | Number of events | 406 bungkus | Both extractors agreed |
Folding packaging (kemasan melipat)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 17.4 % | Both extractors agreed |
Has a splice/joint (ada sambungan)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 7.00 % | Both extractors agreed |
Snap packaging (kemasan jepret)Show verbatim quote (Hasil dan Pembahasan - Check Sheet)Data menunjukkan bahwa jenis kerusakan dengan frekuensi tertinggi selama periode Juli hingga November 2024 adalah kemasan melipat 406 bungkus, kemasan selip sebesar 357 bungkus, dan kemasan jepret sesbesar 390 bungkus. | Process defects (scrap and rework) | Number of events | 390 bungkus | Both extractors agreed |
Snap packaging (kemasan jepret)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 15.3 % | Both extractors agreed |
Missing coding (koding hilang)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 8.80 % | Both extractors agreed |
Random/misaligned packaging (kemasan acak)Show verbatim quote (Gambar 3 Diagram Pareto Kerusakan Kemasan)Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%. | Process defects (scrap and rework) | Share of loss events | 7.70 % | Both extractors agreed |
—Show verbatim quote (Tabel 1. Data Produksi dan Kerusakan Kemasan)Juli 2580 351 5.34% 2% | Process defects (scrap and rework) | Defect rate | 5.34 % | Single extractor |
—Show verbatim quote (Tabel 1. Data Produksi dan Kerusakan Kemasan)Agustus 5850 960 8.03% 2% | Process defects (scrap and rework) | Defect rate | 8.03 % | Single extractor |
—Show verbatim quote (Tabel 1. Data Produksi dan Kerusakan Kemasan)September 6810 115 5.82% 2% | Process defects (scrap and rework) | Defect rate | 5.82 % | Single extractor |
—Show verbatim quote (Tabel 1. Data Produksi dan Kerusakan Kemasan)Oktober 1045 154 4.39% 2% | Process defects (scrap and rework) | Defect rate | 4.39 % | Single extractor |
—Show verbatim quote (Tabel 1. Data Produksi dan Kerusakan Kemasan)November 4870 750 5.21% 2% | Process defects (scrap and rework) | Defect rate | 5.21 % | Single extractor |
—Show verbatim quote (Tabel 1. Data Produksi dan Kerusakan Kemasan)Rata-rata 4231 466 11.01% | Process defects (scrap and rework) | Defect rate | 11.0 % | Single extractor |
—Show verbatim quote (Tabel 3 Stratifikasi)Juli 2024 31 2580 350 83,2 11,3 13,57 | Process defects (scrap and rework) | Defect rate | 13.6 % | Single extractor |
—Show verbatim quote (Tabel 3 Stratifikasi)Agustus 2024 31 5850 960 188,7 31,0 16,41 | Process defects (scrap and rework) | Defect rate | 16.4 % | Single extractor |
—Show verbatim quote (Tabel 3 Stratifikasi)September 2024 30 6774 115 225,8 3,8 1,70 | Process defects (scrap and rework) | Defect rate | 1.70 % | Single extractor |
—Show verbatim quote (Tabel 3 Stratifikasi)Oktober 2024 14 1045 154 74,6 11,0 14,74 | Process defects (scrap and rework) | Defect rate | 14.7 % | Single extractor |
—Show verbatim quote (Tabel 3 Stratifikasi)November 2024 29 4870 675 167,9 23,3 13,86 | Process defects (scrap and rework) | Defect rate | 13.9 % | Single extractor |
—Show verbatim quote (Tabel 5 Perhitungan Quality Loss Function)Juli 2024 2580 351 0.136 172.43 Rp 60.522.70 | Process defects (scrap and rework) | Defect rate | 0.136 % | Single extractor |
—Show verbatim quote (Tabel 5 Perhitungan Quality Loss Function)Agustus 2024 5850 960 0.164 214.97 Rp 206.370.55 | Process defects (scrap and rework) | Defect rate | 0.164 % | Single extractor |
—Show verbatim quote (Tabel 5 Perhitungan Quality Loss Function)September 2024 6810 115 0.017 18.81 Rp 2.163.01 | Process defects (scrap and rework) | Defect rate | 0.0170 % | Single extractor |
—Show verbatim quote (Tabel 5 Perhitungan Quality Loss Function)Oktober 2024 1045 154 0.147 189.26 Rp 29.145.93 | Process defects (scrap and rework) | Defect rate | 0.147 % | Single extractor |
—Show verbatim quote (Tabel 5 Perhitungan Quality Loss Function)November 2024 4870 750 0.154 199.33 Rp 149.499.39 | Process defects (scrap and rework) | Defect rate | 0.154 % | Single extractor |
Folding packaging (kemasan melipat)Show verbatim quote (Tabel 2. Check Sheet (Juli))Kemasan Melipat 64 151 20 33 138 | Process defects (scrap and rework) | Number of events | 64.0 bungkus | Single extractor |
Folding packaging (kemasan melipat)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Kemasan Melipat 64 151 20 33 138 | Process defects (scrap and rework) | Number of events | 151 bungkus | Single extractor |
Folding packaging (kemasan melipat)Show verbatim quote (Tabel 2. Check Sheet (September))Kemasan Melipat 64 151 20 33 138 | Process defects (scrap and rework) | Number of events | 20.0 bungkus | Single extractor |
Folding packaging (kemasan melipat)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Kemasan Melipat 64 151 20 33 138 | Process defects (scrap and rework) | Number of events | 33.0 bungkus | Single extractor |
Folding packaging (kemasan melipat)Show verbatim quote (Tabel 2. Check Sheet (November))Kemasan Melipat 64 151 20 33 138 | Process defects (scrap and rework) | Number of events | 138 bungkus | Single extractor |
Wrinkled seal (seal berkerut)Show verbatim quote (Tabel 2. Check Sheet (Juli))Seal Berkerut 32 90 6 6 38 | Process defects (scrap and rework) | Number of events | 32.0 bungkus | Single extractor |
Wrinkled seal (seal berkerut)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Seal Berkerut 32 90 6 6 38 | Process defects (scrap and rework) | Number of events | 90.0 bungkus | Single extractor |
Wrinkled seal (seal berkerut)Show verbatim quote (Tabel 2. Check Sheet (September))Seal Berkerut 32 90 6 6 38 | Process defects (scrap and rework) | Number of events | 6.00 bungkus | Single extractor |
Wrinkled seal (seal berkerut)Show verbatim quote (Tabel 2. Check Sheet (November))Seal Berkerut 32 90 6 6 38 | Process defects (scrap and rework) | Number of events | 38.0 bungkus | Single extractor |
Missing coding (koding hilang)Show verbatim quote (Tabel 2. Check Sheet (Juli))Koding Hilang 30 85 9 10 71 | Process defects (scrap and rework) | Number of events | 30.0 bungkus | Single extractor |
Missing coding (koding hilang)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Koding Hilang 30 85 9 10 71 | Process defects (scrap and rework) | Number of events | 85.0 bungkus | Single extractor |
Missing coding (koding hilang)Show verbatim quote (Tabel 2. Check Sheet (September))Koding Hilang 30 85 9 10 71 | Process defects (scrap and rework) | Number of events | 9.00 bungkus | Single extractor |
Missing coding (koding hilang)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Koding Hilang 30 85 9 10 71 | Process defects (scrap and rework) | Number of events | 10.0 bungkus | Single extractor |
Missing coding (koding hilang)Show verbatim quote (Tabel 2. Check Sheet (November))Koding Hilang 30 85 9 10 71 | Process defects (scrap and rework) | Number of events | 71.0 bungkus | Single extractor |
Snap packaging (kemasan jepret)Show verbatim quote (Tabel 2. Check Sheet (Juli))Kemasan Jepret 49 139 22 26 154 | Process defects (scrap and rework) | Number of events | 49.0 bungkus | Single extractor |
Snap packaging (kemasan jepret)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Kemasan Jepret 49 139 22 26 154 | Process defects (scrap and rework) | Number of events | 139 bungkus | Single extractor |
Snap packaging (kemasan jepret)Show verbatim quote (Tabel 2. Check Sheet (September))Kemasan Jepret 49 139 22 26 154 | Process defects (scrap and rework) | Number of events | 22.0 bungkus | Single extractor |
Snap packaging (kemasan jepret)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Kemasan Jepret 49 139 22 26 154 | Process defects (scrap and rework) | Number of events | 26.0 bungkus | Single extractor |
Snap packaging (kemasan jepret)Show verbatim quote (Tabel 2. Check Sheet (November))Kemasan Jepret 49 139 22 26 154 | Process defects (scrap and rework) | Number of events | 154 bungkus | Single extractor |
Center seal detached (center seal lekang)Show verbatim quote (Tabel 2. Check Sheet (Juli))Center Seal Lekang 29 97 16 20 78 | Process defects (scrap and rework) | Number of events | 29.0 bungkus | Single extractor |
Center seal detached (center seal lekang)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Center Seal Lekang 29 97 16 20 78 | Process defects (scrap and rework) | Number of events | 97.0 bungkus | Single extractor |
Center seal detached (center seal lekang)Show verbatim quote (Tabel 2. Check Sheet (September))Center Seal Lekang 29 97 16 20 78 | Process defects (scrap and rework) | Number of events | 16.0 bungkus | Single extractor |
Center seal detached (center seal lekang)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Center Seal Lekang 29 97 16 20 78 | Process defects (scrap and rework) | Number of events | 20.0 bungkus | Single extractor |
Center seal detached (center seal lekang)Show verbatim quote (Tabel 2. Check Sheet (November))Center Seal Lekang 29 97 16 20 78 | Process defects (scrap and rework) | Number of events | 78.0 bungkus | Single extractor |
Slip packaging (kemasan selip)Show verbatim quote (Tabel 2. Check Sheet (Juli))Kemasan Selip 57 121 22 30 127 | Process defects (scrap and rework) | Number of events | 57.0 bungkus | Single extractor |
Slip packaging (kemasan selip)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Kemasan Selip 57 121 22 30 127 | Process defects (scrap and rework) | Number of events | 121 bungkus | Single extractor |
Slip packaging (kemasan selip)Show verbatim quote (Tabel 2. Check Sheet (September))Kemasan Selip 57 121 22 30 127 | Process defects (scrap and rework) | Number of events | 22.0 bungkus | Single extractor |
Slip packaging (kemasan selip)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Kemasan Selip 57 121 22 30 127 | Process defects (scrap and rework) | Number of events | 30.0 bungkus | Single extractor |
Slip packaging (kemasan selip)Show verbatim quote (Tabel 2. Check Sheet (November))Kemasan Selip 57 121 22 30 127 | Process defects (scrap and rework) | Number of events | 127 bungkus | Single extractor |
Long seal detached (long seal lekang)Show verbatim quote (Tabel 2. Check Sheet (Juli))Long Seal Lekang 35 90 8 15 69 | Process defects (scrap and rework) | Number of events | 35.0 bungkus | Single extractor |
Long seal detached (long seal lekang)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Long Seal Lekang 35 90 8 15 69 | Process defects (scrap and rework) | Number of events | 90.0 bungkus | Single extractor |
Long seal detached (long seal lekang)Show verbatim quote (Tabel 2. Check Sheet (September))Long Seal Lekang 35 90 8 15 69 | Process defects (scrap and rework) | Number of events | 8.00 bungkus | Single extractor |
Long seal detached (long seal lekang)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Long Seal Lekang 35 90 8 15 69 | Process defects (scrap and rework) | Number of events | 15.0 bungkus | Single extractor |
Long seal detached (long seal lekang)Show verbatim quote (Tabel 2. Check Sheet (November))Long Seal Lekang 35 90 8 15 69 | Process defects (scrap and rework) | Number of events | 69.0 bungkus | Single extractor |
Random/misaligned packaging (kemasan acak)Show verbatim quote (Tabel 2. Check Sheet (Juli))Kemasan Acak 18 88 4 9 44 | Process defects (scrap and rework) | Number of events | 18.0 bungkus | Single extractor |
Random/misaligned packaging (kemasan acak)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Kemasan Acak 18 88 4 9 44 | Process defects (scrap and rework) | Number of events | 88.0 bungkus | Single extractor |
Random/misaligned packaging (kemasan acak)Show verbatim quote (Tabel 2. Check Sheet (September))Kemasan Acak 18 88 4 9 44 | Process defects (scrap and rework) | Number of events | 4.00 bungkus | Single extractor |
Random/misaligned packaging (kemasan acak)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Kemasan Acak 18 88 4 9 44 | Process defects (scrap and rework) | Number of events | 9.00 bungkus | Single extractor |
Random/misaligned packaging (kemasan acak)Show verbatim quote (Tabel 2. Check Sheet (November))Kemasan Acak 18 88 4 9 44 | Process defects (scrap and rework) | Number of events | 44.0 bungkus | Single extractor |
Has a splice/joint (ada sambungan)Show verbatim quote (Tabel 2. Check Sheet (Juli))Ada Sambungan 37 99 8 5 31 | Process defects (scrap and rework) | Number of events | 37.0 bungkus | Single extractor |
Has a splice/joint (ada sambungan)Show verbatim quote (Tabel 2. Check Sheet (Agustus))Ada Sambungan 37 99 8 5 31 | Process defects (scrap and rework) | Number of events | 99.0 bungkus | Single extractor |
Has a splice/joint (ada sambungan)Show verbatim quote (Tabel 2. Check Sheet (September))Ada Sambungan 37 99 8 5 31 | Process defects (scrap and rework) | Number of events | 8.00 bungkus | Single extractor |
Has a splice/joint (ada sambungan)Show verbatim quote (Tabel 2. Check Sheet (Oktober))Ada Sambungan 37 99 8 5 31 | Process defects (scrap and rework) | Number of events | 5.00 bungkus | Single extractor |
Has a splice/joint (ada sambungan)Show verbatim quote (Tabel 2. Check Sheet (November))Ada Sambungan 37 99 8 5 31 | Process defects (scrap and rework) | Number of events | 31.0 bungkus | Single extractor |
Observation units
- CV.XYZ packaging line · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline

