Operator execution error during packaging operation
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).
What happens
A generic deviation from the intended operating procedure occurs during packaging tasks, such as an incorrect action, omission or misjudgement by the operator, without a specific equipment or material failure being identified. The report does not describe the physical mechanism in enough detail to attribute the loss to a particular component or process step.
What is done about it
Reinforce standard operating procedures with clearer work instructions, visual aids and checklists at the packaging station, and strengthen operator training and certification. Improve loss reason coding at the line so that future similar events are logged with enough detail to identify the true root cause.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.6%]
- Expected share of lost time
- 0.3% [0.1–0.9%]
- Share of lost time when present
- 57% [45–67%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.4%]14 studies
- Soft drinks, bottled water and juices0.6% [0.1–1.8%]33 studies
- Brewing, wine and spirits0.9% [0.1–3.2%]14 studies
- Bakery and pasta0.7% [0.1–2.7%]6 studies
- Meat, poultry and seafood0.7% [0.1–2.5%]6 studies
- Fruit and vegetable processing0.7% [0.1–2.6%]4 studies
- Grain and oilseed milling0.7% [0.1–2.5%]4 studies
- Sugar and confectionery0.7% [0.1–2.7%]4 studies
- Snacks, coffee, tea and other foods0.6% [0.1–2.3%]8 studies
- Animal feed and pet food0.7% [0.1–2.6%]5 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.3%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA generic deviation from the intended operating procedure occurs during packaging tasks, such as an incorrect action, omission or misjudgement by the operator, without a specific equipment or material failure being identified. The report does not describe the physical mechanism in enough detail to attribute the loss to a particular component or process step.
How it looks in SCADA data
Engineering guidanceIn SCADA/MES logs this typically appears as an unexplained manual stop, a short anomaly flag or a state change without an associated fault code, often entered as a free-text or miscellaneous reason by the operator or shift supervisor. There is usually no correlated sensor alarm or equipment degradation signal preceding the event.
Countermeasure
Engineering guidanceReinforce standard operating procedures with clearer work instructions, visual aids and checklists at the packaging station, and strengthen operator training and certification. Improve loss reason coding at the line so that future similar events are logged with enough detail to identify the true root cause.
4Sources
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Open sourceShare of lost time: 39.2 % · as reported: “errors in operational development”
Show verbatim quote
Errors in operational development, representing 39.20%, were linked to two root causes: cans failing to meet the required filling level, highlighting the need for systems such as Andon, and technical machinery failures, which accounted for 27.01%

