foratvise
Get Started
Setup and adjustments

Changeover to new plastic package format

Setup and adjustmentsAvailabilityFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 55 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).

What happens

Switching the line to a new plastic container or package format requires mechanical changeover of filling heads, guides, grippers and infeed/outfeed tooling, along with recipe and parameter updates on the control system. The physical dimensional difference of the new package means guides, star wheels, neck handling and sealing tooling must be exchanged or reset before stable production can resume.

What is done about it

Use quick-change tooling and pre-set format parts, validated changeover checklists (SMED methodology) and pre-loaded recipe sets to minimize mechanical adjustment time. Schedule format changes to batch similar package sizes together and verify fit of new containers against existing tooling before the changeover window.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.3% [0.1–1.0%]
Expected share of lost time
0.2% [0.0–0.5%]
Share of lost time when present
55% [42–65%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.5%]18 studies
  • Soft drinks, bottled water and juices
    0.3% [0.0–1.2%]44 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.5%]16 studies
  • Bakery and pasta
    0.4% [0.0–1.6%]0 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.5%]6 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.6%]4 studies
  • Grain and oilseed milling
    0.4% [0.0–1.6%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.5%]6 studies
  • Animal feed and pet food
    0.4% [0.0–1.6%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.5%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Switching the line to a new plastic container or package format requires mechanical changeover of filling heads, guides, grippers and infeed/outfeed tooling, along with recipe and parameter updates on the control system. The physical dimensional difference of the new package means guides, star wheels, neck handling and sealing tooling must be exchanged or reset before stable production can resume.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows an extended machine-state transition from stop/changeover to running, with the line in a non-productive changeover state and no good-count accumulation; recipe or format-ID parameter changes are logged, and downstream machines show starvation while the filler is reconfigured. Multiple short stop/start cycles may appear during mechanical adjustment and trial runs before stable speed is reached.

Countermeasure

Engineering guidance

Use quick-change tooling and pre-set format parts, validated changeover checklists (SMED methodology) and pre-loaded recipe sets to minimize mechanical adjustment time. Schedule format changes to batch similar package sizes together and verify fit of new containers against existing tooling before the changeover window.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 2.00 min · as reported: “Install new plastic packages”
    Show verbatim quote
    Install new plastic packages 2 min 17 min Internal
  2. Lost time: 2.00 min · as reported: “Install new plastic packages”
    Show verbatim quote
    Install new plastic packages | 2 min | 10 min | Internal