foratvise
Get Started
Idling and minor stops (micro-stops)

Packaging line jam or blockage

Idling and minor stops (micro-stops)PerformancePackaging (forming, sealing, wrapping, case packing, palletizing)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 54 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

Containers, cartons, or packaging materials accumulate and jam at a transfer point, guide rail, or infeed/outfeed of a packaging machine due to misalignment, timing mismatch, or an irregular product shape, interrupting the normal flow of units through the equipment.

What is done about it

Clear the jam, realign guides and sensors, and adjust timing or infeed pressure; implement preventive checks on guide rails, photoeyes, and product spacing to reduce recurrence.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
54% [42–66%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.3%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.7%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.1%]14 studies
  • Bakery and pasta
    0.6% [0.1–2.5%]6 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.1%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.4%]4 studies
  • Grain and oilseed milling
    0.6% [0.1–2.4%]4 studies
  • Sugar and confectionery
    0.6% [0.1–2.4%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.4%]8 studies
  • Animal feed and pet food
    0.6% [0.1–2.3%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–3.1%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Containers, cartons, or packaging materials accumulate and jam at a transfer point, guide rail, or infeed/outfeed of a packaging machine due to misalignment, timing mismatch, or an irregular product shape, interrupting the normal flow of units through the equipment.

How it looks in SCADA data

Engineering guidance

Short machine-state transitions to stop or fault status at the packaging station, often with a jam or blockage alarm code, accompanied by a brief rise in upstream accumulation or downstream starvation of the next machine until the operator clears the obstruction.

Countermeasure

Engineering guidance

Clear the jam, realign guides and sensors, and adjust timing or infeed pressure; implement preventive checks on guide rails, photoeyes, and product spacing to reduce recurrence.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 67.5 % · as reported: “Blockages/Process Failure”
    Show verbatim quote
    Blockages/Process Failure 67.46% 63.60% 25.76%
  2. Share of lost time: 25.8 % · as reported: “Blockages/Process Failure”
    Show verbatim quote
    Blockages/Process Failure 67.46% 63.60% 25.76%