Perforation blade wear, breakage or fouling
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).
What happens
The blade that perforates the packaging film loses its cutting edge through repeated contact with the material, chips or snaps under cyclic mechanical stress, or accumulates product residue and film debris on its edge. Any of these conditions prevents the blade from cleanly piercing the film, so holes are missing, torn, or incomplete and the machine must be stopped for blade replacement or cleaning.
What is done about it
Implement a preventive replacement schedule for perforation blades based on cycle counts, and include blade sharpness and cleanliness checks in routine inspections. Use materials and coatings resistant to wear and residue buildup, and add quick-change blade holders to reduce the downtime needed for replacement or cleaning.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.5%]
- Expected share of lost time
- 0.3% [0.1–0.9%]
- Share of lost time when present
- 57% [46–68%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.3%]14 studies
- Soft drinks, bottled water and juices0.6% [0.1–1.8%]33 studies
- Brewing, wine and spirits0.6% [0.1–2.2%]14 studies
- Bakery and pasta0.7% [0.1–2.5%]6 studies
- Meat, poultry and seafood0.7% [0.1–2.6%]6 studies
- Fruit and vegetable processing0.7% [0.1–2.5%]4 studies
- Grain and oilseed milling0.7% [0.1–2.5%]4 studies
- Sugar and confectionery0.7% [0.1–2.6%]4 studies
- Snacks, coffee, tea and other foods0.7% [0.1–2.3%]8 studies
- Animal feed and pet food0.7% [0.1–2.6%]5 studies
- Food manufacturing (unspecified or mixed)0.9% [0.1–3.3%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe blade that perforates the packaging film loses its cutting edge through repeated contact with the material, chips or snaps under cyclic mechanical stress, or accumulates product residue and film debris on its edge. Any of these conditions prevents the blade from cleanly piercing the film, so holes are missing, torn, or incomplete and the machine must be stopped for blade replacement or cleaning.
How it looks in SCADA data
Engineering guidanceUnplanned stop events logged on the packaging machine with maintenance intervention, often preceded by rising rejects or downstream inspection alarms related to missing or malformed perforations. Fault or jam alarms may trigger at the perforation station, and machine state logs show extended downtime tied to blade change or cleaning tasks rather than normal cycle stops.
Countermeasure
Engineering guidanceImplement a preventive replacement schedule for perforation blades based on cycle counts, and include blade sharpness and cleanliness checks in routine inspections. Use materials and coatings resistant to wear and residue buildup, and add quick-change blade holders to reduce the downtime needed for replacement or cleaning.
4Sources
- PENURUNAN DOWNTIME UNTUK MENINGKATKAN ACHIEVEMENT (ACH) MELALUI IMPLEMENTASI TPM (TOTAL PRODUCTIVE MAINTENANCE) DAN ANALISIS SIX BIG LOSSES DI PT TES HF (2026)Open sourceNumber of events: 1,576 events · as reported: “pisau perforasi tumpul, patah, atau kotor”
Show verbatim quote
gangguan operasional paling sering disebabkan oleh kondisi pisau perforasi yang tumpul, patah, atau kotor dengan frekuensi sebanyak 1.576 kejadian
- PENURUNAN DOWNTIME UNTUK MENINGKATKAN ACHIEVEMENT (ACH) MELALUI IMPLEMENTASI TPM (TOTAL PRODUCTIVE MAINTENANCE) DAN ANALISIS SIX BIG LOSSES DI PT TES HF (2026)Open sourceShare of loss events: 34.0 % · as reported: “pisau perforasi tumpul, patah, atau kotor”
Show verbatim quote
pisau perforasi yang tumpul, patah, atau kotor dengan frekuensi sebanyak 1.576 kejadian (34,03%)

