Pneumatic Component Failure (Air Hose / Solenoid Valve)
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
The pneumatic circuit that actuates the filling valves, cylinders or nozzles loses integrity because an air hose cracks, splits, abrades or disconnects from vibration and fatigue, or because a solenoid valve sticks, wears internally, or suffers a coil/electrical fault that blocks air flow. Without reliable compressed air delivery or switching, the filling actuators cannot move correctly and the machine stops or faults.
What is done about it
Implement scheduled inspection and preventive replacement of air hoses based on condition (cracking, abrasion, fitting wear), route hoses away from pinch points and heat sources, and apply periodic functional testing, cleaning or proactive replacement of solenoid valves. Install upstream filtration, pressure regulation and monitoring to detect degradation before it causes a stop.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.2%]
- Expected share of lost time
- 0.2% [0.0–0.7%]
- Share of lost time when present
- 57% [46–67%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.6%]18 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.3%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.8%]16 studies
- Bakery and pasta0.5% [0.0–1.9%]0 studies
- Meat, poultry and seafood0.5% [0.0–1.7%]6 studies
- Fruit and vegetable processing0.5% [0.0–1.9%]4 studies
- Grain and oilseed milling0.5% [0.0–1.9%]6 studies
- Sugar and confectionery0.5% [0.0–1.9%]3 studies
- Snacks, coffee, tea and other foods0.5% [0.0–1.9%]6 studies
- Animal feed and pet food0.5% [0.0–1.8%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.7%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe pneumatic circuit that actuates the filling valves, cylinders or nozzles loses integrity because an air hose cracks, splits, abrades or disconnects from vibration and fatigue, or because a solenoid valve sticks, wears internally, or suffers a coil/electrical fault that blocks air flow. Without reliable compressed air delivery or switching, the filling actuators cannot move correctly and the machine stops or faults.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show low air pressure alarms or pressure-switch trips localized to the filling station, actuator position feedback that does not match the commanded state, cylinder or valve cycle timeouts, and the filling head registering a fault or stopped state while upstream/downstream stations continue briefly before starving or blocking. Repeated short stop events with the same pneumatic fault code are typical.
Countermeasure
Engineering guidanceImplement scheduled inspection and preventive replacement of air hoses based on condition (cracking, abrasion, fitting wear), route hoses away from pinch points and heat sources, and apply periodic functional testing, cleaning or proactive replacement of solenoid valves. Install upstream filtration, pressure regulation and monitoring to detect degradation before it causes a stop.
4Sources
- Integration of Overall Equipment Effectiveness and Six Sigma Approach to Minimize Product Defect and Machine Downtime (2023)Open sourceNumber of events: 2.00 events · as reported: “Solenoid Air”
Show verbatim quote
Solenoid Air 2
- Integration of Overall Equipment Effectiveness and Six Sigma Approach to Minimize Product Defect and Machine Downtime (2023)Open sourceNumber of events: 5.00 events · as reported: “Air Hose”
Show verbatim quote
Air Hose 5

