Poor housekeeping and workplace organization
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 1 of the 43 studies that could observe it (sparse evidence).
What happens
A disorganized and dirty work area around the milling equipment forces operators to spend time locating tools, spare parts or cleaning materials, and obstructs access to machine panels, chutes and controls. This organizational deficiency is not a direct equipment failure but an underlying condition that slows down normal operation, response to stoppages and routine servicing, and can also increase contamination or safety risks.
What is done about it
Implement a structured housekeeping and workplace organization program (such as a five-S approach) around the milling area, with designated storage locations for tools and materials, visual management, and scheduled cleanliness audits integrated into the standard work routine.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.9% [0.2–2.7%]
- Expected share of lost time
- 0.5% [0.1–1.6%]
- Share of lost time when present
- 56% [45–67%]
- Studies / units
- 43 / 48
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products1.1% [0.1–4.4%]5 studies
- Soft drinks, bottled water and juices1.1% [0.1–4.5%]1 study
- Brewing, wine and spirits1.1% [0.1–4.3%]0 studies
- Bakery and pasta1.1% [0.1–4.3%]0 studies
- Meat, poultry and seafood1.1% [0.1–4.4%]0 studies
- Fruit and vegetable processing1.1% [0.1–4.3%]2 studies
- Grain and oilseed milling1.0% [0.1–4.0%]7 studies
- Sugar and confectionery1.0% [0.1–3.9%]10 studies
- Snacks, coffee, tea and other foods1.0% [0.1–3.9%]5 studies
- Animal feed and pet food1.5% [0.1–6.0%]6 studies
- Food manufacturing (unspecified or mixed)1.1% [0.1–4.4%]7 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA disorganized and dirty work area around the milling equipment forces operators to spend time locating tools, spare parts or cleaning materials, and obstructs access to machine panels, chutes and controls. This organizational deficiency is not a direct equipment failure but an underlying condition that slows down normal operation, response to stoppages and routine servicing, and can also increase contamination or safety risks.
How it looks in SCADA data
Engineering guidanceThere is no direct sensor signature in the SCADA/MES system for this cause; it typically appears indirectly as longer-than-expected intervention or changeover durations, recurring manual stop codes classified as organizational or external, and inconsistent operator comments in shift logs that reference searching for tools or clearing obstructed access points.
Countermeasure
Engineering guidanceImplement a structured housekeeping and workplace organization program (such as a five-S approach) around the milling area, with designated storage locations for tools and materials, visual management, and scheduled cleanliness audits integrated into the standard work routine.
4Sources
- Implementing Lean and TPM for Machine Availability Enhancement: A Case Study in the Peruvian Food Processing Industry (2025)Open sourceShare of lost time: 21.0 % · as reported: “lack of order and cleanliness in the facility”
Show verbatim quote
On the other hand, operator failures were linked to a lack of order and cleanliness in the facility (21%).

