foratvise
Get Started
Setup and adjustments

Scheduled preventive maintenance of sealing machine

Setup and adjustmentsAvailabilityCapping and seaming

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 82 studies that could observe it (sparse evidence).

What happens

Production time is consumed by routine preventive-maintenance tasks on the sealing machine, such as cleaning of sealing heads, calibration checks, lubrication and inspection of moving parts, and replacement of wear items like gaskets, seals and rollers. These tasks are usually scheduled to coincide with changeovers or planned stops to keep the sealer within specification, so the time is booked as an adjustment activity rather than an unplanned breakdown.

What is done about it

Standardize preventive-maintenance checklists and frequencies for the sealing machine, use quick-change kits for gaskets, seals and rollers to shorten intervention time, and synchronize PM tasks with planned changeovers so they add minimal extra downtime. Introduce condition-based monitoring where feasible to optimize replacement and inspection intervals rather than relying solely on fixed schedules.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.7%]
Expected share of lost time
0.4% [0.1–1.0%]
Share of lost time when present
58% [46–69%]
Studies / units
82 / 109
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.7% [0.1–2.6%]11 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.1%]26 studies
  • Brewing, wine and spirits
    0.7% [0.1–2.5%]11 studies
  • Bakery and pasta
    0.7% [0.1–2.8%]0 studies
  • Meat, poultry and seafood
    1.0% [0.1–3.8%]7 studies
  • Fruit and vegetable processing
    0.7% [0.1–3.0%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.7%]3 studies
  • Sugar and confectionery
    0.7% [0.1–2.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.7%]4 studies
  • Animal feed and pet food
    0.7% [0.1–2.9%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.7%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Production time is consumed by routine preventive-maintenance tasks on the sealing machine, such as cleaning of sealing heads, calibration checks, lubrication and inspection of moving parts, and replacement of wear items like gaskets, seals and rollers. These tasks are usually scheduled to coincide with changeovers or planned stops to keep the sealer within specification, so the time is booked as an adjustment activity rather than an unplanned breakdown.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show recurring machine-state blocks labelled setup or maintenance of fairly regular duration, often aligned with shift start, changeover windows or a fixed calendar cadence, without preceding fault or stop alarms. Work-order or maintenance-log entries, rather than automatic fault codes, typically accompany these periods, and downstream stations show no starvation pattern characteristic of a breakdown.

Countermeasure

Engineering guidance

Standardize preventive-maintenance checklists and frequencies for the sealing machine, use quick-change kits for gaskets, seals and rollers to shorten intervention time, and synchronize PM tasks with planned changeovers so they add minimal extra downtime. Introduce condition-based monitoring where feasible to optimize replacement and inspection intervals rather than relying solely on fixed schedules.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 85.0 min · as reported: “Calibration verification”
    Show verbatim quote
    Calibration verification 85 min X
  2. Lost time: 65.0 s · as reported: “Daily cleaning of sealing heads”
    Show verbatim quote
    Daily cleaning of sealing heads 65 s X
  3. Lost time: 85.0 s · as reported: “Seal replacement”
    Show verbatim quote
    Seal replacement 85 s X
  4. Lost time: 60.0 s · as reported: “Inspection of worn parts”
    Show verbatim quote
    Inspection of worn parts 60 s X
  5. Lost time: 70.0 s · as reported: “Roller inspection”
    Show verbatim quote
    Roller inspection 70 s X
  6. Lost time: 80.0 s · as reported: “Inspection and lubrication of moving parts”
    Show verbatim quote
    Inspection and lubrication of moving parts 80 s X
  7. Lost time: 120 s · as reported: “General equipment cleaning”
    Show verbatim quote
    General equipment cleaning 120 s X
  8. Lost time: 80.0 s · as reported: “Gasket replacement”
    Show verbatim quote
    Gasket replacement 80 s X