foratvise
Get Started
Idling and minor stops (micro-stops)

Pull/feed roller jam

Idling and minor stops (micro-stops)PerformancePackaging (forming, sealing, wrapping, case packing, palletizing)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 53 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

The roller that pulls or feeds packaging film/material through the machine jams because material wrinkles, slips, sticks or accumulates debris between the roller and its counter-surface, interrupting the feed path. This stops the forward motion of the web or sheet and halts the packaging cycle until the obstruction is cleared manually.

What is done about it

Operator clears the jammed material, inspects and cleans the roller surface, and re-aligns or re-tensions the web before restarting. Preventive measures include scheduled cleaning of rollers, correct tension/alignment setting, and guarding against debris or material buildup on the roller nip.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
53% [41–65%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.2%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.8%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]14 studies
  • Bakery and pasta
    0.6% [0.1–2.4%]6 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.3%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.5%]4 studies
  • Grain and oilseed milling
    0.6% [0.1–2.4%]4 studies
  • Sugar and confectionery
    0.6% [0.1–2.4%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]8 studies
  • Animal feed and pet food
    0.6% [0.1–2.4%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.9% [0.1–3.3%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The roller that pulls or feeds packaging film/material through the machine jams because material wrinkles, slips, sticks or accumulates debris between the roller and its counter-surface, interrupting the feed path. This stops the forward motion of the web or sheet and halts the packaging cycle until the obstruction is cleared manually.

How it looks in SCADA data

Engineering guidance

Short, frequently repeated stop states on the packaging machine with rapid operator reset, often accompanied by a feed/pull motor current anomaly (stall or overload) or a web-break/tension sensor fault. Minor-stop counters increment sharply while cycle time per pack shows brief irregular gaps rather than a sustained downtime block.

Countermeasure

Engineering guidance

Operator clears the jammed material, inspects and cleans the roller surface, and re-aligns or re-tensions the web before restarting. Preventive measures include scheduled cleaning of rollers, correct tension/alignment setting, and guarding against debris or material buildup on the roller nip.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 924 events · as reported: “roll tarik macet”
    Show verbatim quote
    roll tarik macet sebanyak 924 kejadian (19,95%)
  2. Share of loss events: 20.0 % · as reported: “roll tarik macet”
    Show verbatim quote
    roll tarik macet sebanyak 924 kejadian (19,95%)