Delay awaiting quality laboratory analysis (titratable acidity)
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 127 studies that could observe it (sparse evidence).
What happens
Production or release of a batch must pause while a sample is taken to the QC laboratory for titratable acidity measurement, and operations cannot proceed until the analytical result is obtained and the batch is accepted or adjusted. The line or process step is held in a waiting state that depends on laboratory workload and turnaround rather than on equipment condition.
What is done about it
Implement at-line or inline titratable acidity sensors or rapid analyzers to shorten the feedback loop, and establish parallel sampling and staggered batch scheduling so production can continue on other batches while results are pending. Improve laboratory staffing, sample transport logistics and result reporting systems to reduce the waiting time.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.1%]
- Expected share of lost time
- 0.2% [0.0–0.6%]
- Share of lost time when present
- 57% [45–67%]
- Studies / units
- 127 / 161
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.6%]13 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.4%]26 studies
- Brewing, wine and spirits0.4% [0.0–1.6%]11 studies
- Bakery and pasta0.4% [0.0–1.4%]24 studies
- Meat, poultry and seafood0.4% [0.0–1.6%]9 studies
- Fruit and vegetable processing0.4% [0.0–1.8%]7 studies
- Grain and oilseed milling0.4% [0.0–1.7%]6 studies
- Sugar and confectionery0.4% [0.0–1.6%]9 studies
- Snacks, coffee, tea and other foods0.4% [0.0–1.7%]5 studies
- Animal feed and pet food0.4% [0.0–1.7%]7 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.5%]10 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceProduction or release of a batch must pause while a sample is taken to the QC laboratory for titratable acidity measurement, and operations cannot proceed until the analytical result is obtained and the batch is accepted or adjusted. The line or process step is held in a waiting state that depends on laboratory workload and turnaround rather than on equipment condition.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show the line or process unit in an idle or hold state with no associated equipment fault or alarm, the hold period aligning with sample collection and lab result timestamps. Repeated short-to-moderate waiting intervals appear clustered around scheduled quality checkpoints rather than following any mechanical pattern.
Countermeasure
Engineering guidanceImplement at-line or inline titratable acidity sensors or rapid analyzers to shorten the feedback loop, and establish parallel sampling and staggered batch scheduling so production can continue on other batches while results are pending. Improve laboratory staffing, sample transport logistics and result reporting systems to reduce the waiting time.
4Sources
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Open sourceMean event duration: 15.0 min · as reported: “TA (titratable acidity) measurement and analysis”
Show verbatim quote
the machine running time to measure TA is around 15 minutes. It shows that the measurement of TA takes long time, which leads to downtime

