foratvise
Get Started
Included study

An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime

Open source

1Bibliographic record

Authors
Duy Ly-Anh, An Phan-Hoang, Dung Le-Phuong, Quynh-Lam Ngoc Le, Do Ngoc Hien
Year
2023
Venue
International Journal of Science and Research Archive
Country
Vietnam
Segment
Soft drinks, bottled water and juices
Process family
Filling and packaging line
Study type
Before/after intervention
Extraction scope
Full text
Size
1 plants · 1 lines · — machines
Observation period
—
Data collection
not_reported
Intervention
Show the setting as described by the study
The research would present an effective performance of lean tools implementing in an Lemon Tea processing line of a Drink Industry as a case study.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 8Moderate risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
waiting time for syrup, filler, packer, sleever, conveyor
Show verbatim quote (Section 2.1 / Figure 2)
The machine downtime is recognized as a critical problem of the waiting time for syrup, filler, packer, sleever, conveyor, which accounts for 66 percent of the total time (as shown on Figure 2).
Organizational or external stops (material or personnel shortage, utilities outage)Share of lost time66.0 %Single extractor
total leading time of syrup batching process
Show verbatim quote (Section 2.2.2)
Total leading time of recently batching syrup process for new product is 140 minutes.
Not classifiable from the reportLost time140 minSingle extractor
total leading time of syrup batching process
Show verbatim quote (Section 3 / Figure 11)
The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11.
Not classifiable from the reportLost time98.0 minSingle extractor
high fructose corn sugar transfer periodHFCS transfer pump
Show verbatim quote (Section 2.3.1)
The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline).
Reduced speedLost time35.0 minSingle extractor
pump flow rate below design capacityHFCS transfer pump
Show verbatim quote (Section 2.3.1)
The actual pump capacity just reach to 3.5-3.8 bar and the corresponding flow is 10.8 m3/h.
Reduced speedThroughput10.8 m3/hSingle extractor
pumping of sugar solution (HFCS transfer) after pump/pipeline renovationHFCS transfer pump
Show verbatim quote (Section 3)
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
Reduced speedLost time20.0 minSingle extractor
pump and pipeline renovation (HFCS transfer time reduction)HFCS transfer pump
Show verbatim quote (Section 3)
After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm (as shown on Figure 12), the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%).
Reduced speedShare of lost time10.7 %Single extractor
—HFCS transfer pump
Show verbatim quote (Section 3)
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
noneThroughput18.9 m3/hSingle extractor
—HFCS transfer pump
Show verbatim quote (Section 3)
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
noneSpeed ratio58.0 %Single extractor
quality check step (QC parameters: Brix, acidity, pH, appearance)
Show verbatim quote (Section 2.3.3)
The total time for QC to complete the job is around 20 minutes.
Not classifiable from the reportLost time20.0 minSingle extractor
quality check step after rearrangement
Show verbatim quote (Section 3)
After rearranging the quality test for syrup output parameters, the time to complete batching and move to filling step is shortened to only 5 minutes.
Not classifiable from the reportLost time5.00 minSingle extractor
Brix check station relocationBrix meter
Show verbatim quote (Section 3)
The process is cut down 10-12 minutes of downtime (8.57%).
Not classifiable from the reportShare of lost time8.57 %Single extractor
waiting time for syrup
Show verbatim quote (Section 2.1 (Define phase), page 2)
The machine downtime is recognized as a critical problem of the waiting time for syrup, filler, packer, sleever, conveyor, which accounts for 66 percent of the total time (as shown on Figure 2).
Organizational or external stops (material or personnel shortage, utilities outage)Share of planned time66.0 %Single extractor
—syrup batching tanks NCB-7 and NCB-8
Show verbatim quote (Section 2.2.2 (Root Cause Analysis), page 6)
Total leading time of recently batching syrup process for new product is 140 minutes.
noneMean event duration140 minSingle extractor
HFCS transfer and filtering through pump systemHFCS pump and pipeline, filtering system
Show verbatim quote (Section 2.3.1, page 7)
The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline).
Organizational or external stops (material or personnel shortage, utilities outage)Mean event duration35.0 minSingle extractor
quality check for Brix, acidity (TA), pH, appearanceQC department and measurement equipment
Show verbatim quote (Section 2.3.3, page 8)
The total time for QC to complete the job is around 20 minutes.
Organizational or external stops (material or personnel shortage, utilities outage)Mean event duration20.0 minSingle extractor
TA (titratable acidity) measurement and analysisTA measuring equipment, QC laboratory
Show verbatim quote (Section 2.3.3, page 8)
the machine running time to measure TA is around 15 minutes. It shows that the measurement of TA takes long time, which leads to downtime
Organizational or external stops (material or personnel shortage, utilities outage)Mean event duration15.0 minSingle extractor
—syrup batching tanks NCB-7 and NCB-8
Show verbatim quote (Section 3 (Results), page 6)
The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11.
noneMean event duration98.0 minSingle extractor
HFCS transfer and filtering after pump pressure and pipeline optimizationHFCS pump and pipeline system
Show verbatim quote (Section 3 (Results), page 7)
After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm ... the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%).
noneMean event duration20.0 minSingle extractor
quality check for Brix, pH, TA using correlation equation methodQC measurement equipment, Brix meter at mixing station
Show verbatim quote (Section 3 (Results), page 9)
After rearranging the quality test for syrup output parameters, the time to complete batching and move to filling step is shortened to only 5 minutes. In addition, it ensures that the product quality meet the standards when the TA measurement step is taken place at the same time with the filling stage.
noneMean event duration5.00 minSingle extractor

Observation units

  • PET Hot Fill Line · Whole line or unspecified equipment · Baseline
  • Syrup batching process (overall) · Mixing and blending · Baseline
  • Syrup batching process (overall) · Mixing and blending · After intervention
  • HFCS transfer pump · Mixing and blending · Baseline
  • HFCS transfer pump · Mixing and blending · After intervention
  • Quality Control / Brix station · Inspection and checkweighing · Baseline
  • Quality Control / Brix station · Inspection and checkweighing · After intervention
  • Lemon Tea hot fill line · Whole line or unspecified equipment · Baseline
  • Lemon Tea hot fill line · Whole line or unspecified equipment · After intervention