foratvise
Get Started
organizational external

Raw material staging congestion (frequent pallet relocation)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).

What happens

Insufficient or poorly organized staging space in the raw material holding or thawing area forces operators to repeatedly move pallets to free access routes, maintain rotation order or make room for incoming lots. This non value adding handling consumes labor and forklift capacity and delays the availability of thawed or staged material for the line, creating an organizational bottleneck upstream of production rather than an equipment fault.

What is done about it

Redesign the staging or thawing area layout with dedicated FIFO lanes sized to real buffer needs, define fixed pallet slotting rules and clear access aisles, and schedule incoming lots to minimize double handling, so that material reaches the line without unnecessary intermediate relocations.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.4%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
57% [45–67%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.3%]13 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–1.9%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]11 studies
  • Bakery and pasta
    0.6% [0.1–2.0%]24 studies
  • Meat, poultry and seafood
    0.9% [0.1–3.3%]9 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.2%]7 studies
  • Grain and oilseed milling
    0.6% [0.1–2.4%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.3%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]5 studies
  • Animal feed and pet food
    0.6% [0.1–2.4%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.3%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Insufficient or poorly organized staging space in the raw material holding or thawing area forces operators to repeatedly move pallets to free access routes, maintain rotation order or make room for incoming lots. This non value adding handling consumes labor and forklift capacity and delays the availability of thawed or staged material for the line, creating an organizational bottleneck upstream of production rather than an equipment fault.

How it looks in SCADA data

Engineering guidance

Rarely captured directly by SCADA since it occurs outside the controlled process area; it appears indirectly as material starvation or shortage stops logged at the first production machine, extended intervals between material request and material arrival in MES logistics modules, and elevated forklift or warehouse management system movement counts without corresponding production output.

Countermeasure

Engineering guidance

Redesign the staging or thawing area layout with dedicated FIFO lanes sized to real buffer needs, define fixed pallet slotting rules and clear access aisles, and schedule incoming lots to minimize double handling, so that material reaches the line without unnecessary intermediate relocations.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of loss events: 18.0 % · as reported: “frequent relocation of raw material pallets within the thawing area”
    Show verbatim quote
    Additionally, the frequent relocation of raw material pallets within the thawing area represents 18% of waste and the requirement for a 25-minute cleaning cycle of the tamping machine before each batch contributes 14.4%.