foratvise
Get Started
Setup and adjustments

Raw material staging and setup for cooking

Setup and adjustmentsAvailabilityCooking and frying

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 57 studies that could observe it (sparse evidence).

What happens

Before a cooking run can start, operators must fetch, weigh, stage and load the correct raw materials and ingredients at the cooker or kettle, verify recipe parameters and bring the process to the required conditions. This preparatory work occupies the equipment without producing output, so the time between the end of the previous run and the first good product is lost to setup rather than to a fault.

What is done about it

Pre-weigh and stage ingredients in advance using kitting or batching systems, standardize recipe loading through pre-configured electronic recipes, and run parallel preparation of the next batch while the current one is still cooking to shorten the changeover window.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.5%]
Expected share of lost time
0.3% [0.0–0.8%]
Share of lost time when present
57% [45–67%]
Studies / units
57 / 69
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.5% [0.0–2.2%]5 studies
  • Soft drinks, bottled water and juices
    0.5% [0.0–2.4%]1 study
  • Brewing, wine and spirits
    0.5% [0.0–2.2%]0 studies
  • Bakery and pasta
    0.5% [0.0–1.8%]24 studies
  • Meat, poultry and seafood
    0.5% [0.0–2.2%]2 studies
  • Fruit and vegetable processing
    0.5% [0.0–2.2%]2 studies
  • Grain and oilseed milling
    0.5% [0.0–2.2%]0 studies
  • Sugar and confectionery
    0.5% [0.0–2.0%]8 studies
  • Snacks, coffee, tea and other foods
    0.5% [0.0–2.0%]4 studies
  • Animal feed and pet food
    0.5% [0.0–2.2%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.5% [0.0–2.3%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Before a cooking run can start, operators must fetch, weigh, stage and load the correct raw materials and ingredients at the cooker or kettle, verify recipe parameters and bring the process to the required conditions. This preparatory work occupies the equipment without producing output, so the time between the end of the previous run and the first good product is lost to setup rather than to a fault.

How it looks in SCADA data

Engineering guidance

The SCADA/MES log shows the cooker or kettle in an idle or manual/setup state preceding the first production cycle, with no process alarms active; recipe download and ingredient-loading events, or manual data entry at the HMI, mark the start, and the state ends when temperature, level or cycle parameters reach target and stable output begins.

Countermeasure

Engineering guidance

Pre-weigh and stage ingredients in advance using kitting or batching systems, standardize recipe loading through pre-configured electronic recipes, and run parallel preparation of the next batch while the current one is still cooking to shorten the changeover window.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 1,800 s · as reported: “Setting up raw materials for cooking process”
    Show verbatim quote
    6 Setting up raw materials for cooking process 1800 1800 -
  2. Lost time: 1,200 s · as reported: “Setting up raw materials for cooking process”
    Show verbatim quote
    4 Setting up raw materials for cooking process 1200 - 1200