foratvise
Get Started
Idling and minor stops (micro-stops)

Sanitation-in-place (SIP) cycle on filler

Idling and minor stops (micro-stops)PerformanceFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 54 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).

What happens

A sanitation-in-place routine is triggered on the filler to disinfect product-contact surfaces (valves, nozzles, bowl) using chemical or hot-water circuits without full disassembly. During the cycle the filler is held in a non-production state while sanitizing fluid circulates and drains, interrupting container flow even though no mechanical fault is present.

What is done about it

Schedule SIP cycles to coincide with planned breaks, format changeovers or shift gaps rather than mid-run, and automate the recipe-driven sequence with sensor-confirmed endpoints to minimize cycle duration; where feasible, use parallel or modular sanitation circuits so the filler returns to production as soon as validation criteria are met.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.4%]
Expected share of lost time
0.3% [0.1–0.7%]
Share of lost time when present
54% [41–65%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.1%]18 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.0%]44 studies
  • Brewing, wine and spirits
    0.5% [0.1–1.9%]16 studies
  • Bakery and pasta
    0.6% [0.1–2.6%]0 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.2%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.3%]4 studies
  • Grain and oilseed milling
    0.6% [0.1–2.2%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.2%]3 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.1%]6 studies
  • Animal feed and pet food
    0.6% [0.1–2.3%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.1%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A sanitation-in-place routine is triggered on the filler to disinfect product-contact surfaces (valves, nozzles, bowl) using chemical or hot-water circuits without full disassembly. During the cycle the filler is held in a non-production state while sanitizing fluid circulates and drains, interrupting container flow even though no mechanical fault is present.

How it looks in SCADA data

Engineering guidance

MES/SCADA logs a distinct SIP or sanitation machine state with filler run and fill-valve cycle counters frozen at zero, while sanitation-circuit flow, temperature or conductivity sensors show active signals; the state recurs at regular intervals and upstream/downstream equipment shows blocking or starvation during the window.

Countermeasure

Engineering guidance

Schedule SIP cycles to coincide with planned breaks, format changeovers or shift gaps rather than mid-run, and automate the recipe-driven sequence with sensor-confirmed endpoints to minimize cycle duration; where feasible, use parallel or modular sanitation circuits so the filler returns to production as soon as validation criteria are met.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 1,943 min · as reported: “SIP (Sanitation In Place)”
    Show verbatim quote
    In the month February – May 2019 recorded existence minor idling downtime stop at line 4 , namely , CIP ( Cleaning In Place ) 2,509 minutes , SIP ( Sanitation In Place ) 1,943 minutes , stuck stamp on track 484 minutes , bottle stuck in the SIPA 322 divider , tilting was stuck for 277 minutes and the pallet ran out for 93 minutes .