foratvise
Get Started
planned downtime

Scheduled short breaks

planned downtimeFilling

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).

What happens

The filling line is deliberately stopped for short, pre-scheduled operator breaks (rest periods, shift handover pauses) that are built into the production plan rather than arising from any equipment or process fault.

What is done about it

Stagger or rotate operator breaks using relief personnel so the vacuum filler can keep running, or synchronize breaks with other already-planned stoppages to avoid adding extra downtime to the line.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
56% [44–67%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.4%]18 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.7%]44 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.3%]16 studies
  • Bakery and pasta
    0.7% [0.1–2.6%]0 studies
  • Meat, poultry and seafood
    1.0% [0.1–3.4%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.6%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.7%]6 studies
  • Sugar and confectionery
    0.7% [0.1–2.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.4%]6 studies
  • Animal feed and pet food
    0.7% [0.1–2.6%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.4%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The filling line is deliberately stopped for short, pre-scheduled operator breaks (rest periods, shift handover pauses) that are built into the production plan rather than arising from any equipment or process fault.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show the filler entering a planned idle or standby state with no active alarms, at regular intervals that match the break schedule, with clean stop and restart commands typically issued or acknowledged by an operator.

Countermeasure

Engineering guidance

Stagger or rotate operator breaks using relief personnel so the vacuum filler can keep running, or synchronize breaks with other already-planned stoppages to avoid adding extra downtime to the line.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 30.0 min · as reported: “Short breaks”
    Show verbatim quote
    Short breaks (ShB) 2 times per 15 min. – 30 min.