foratvise
Get Started
Process defects (scrap and rework)

Seed/foreign fragment contamination in pulp

Process defects (scrap and rework)QualitySeparation (centrifugation, filtration, membranes)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 47 % of the line's lost time. Reported by 0 of the 37 studies that could observe it (sparse evidence).

What happens

Worn or misadjusted screens, sieves or extraction paddles in the pulping/separation stage fail to fully remove seeds, pits or skin fragments from the fruit mass, letting them pass through with the finished pulp. These fragments both downgrade or reject the pulp batch and can lodge in downstream equipment such as pumps, valves or filling nozzles, triggering sensor faults or forcing the line to stop.

What is done about it

Inspect and replace worn screens, sieves and extractor clearances on a preventive schedule, verify screen mesh size against the fruit variety, and add an online foreign-material or seed detection check before filling to catch escapes early.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.9%]
Expected share of lost time
0.3% [0.0–0.9%]
Share of lost time when present
47% [36–58%]
Studies / units
37 / 44
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.6%]5 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.8%]1 study
  • Brewing, wine and spirits
    0.7% [0.1–2.8%]1 study
  • Bakery and pasta
    0.7% [0.1–2.7%]0 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.6%]2 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.8%]3 studies
  • Grain and oilseed milling
    0.6% [0.1–2.6%]6 studies
  • Sugar and confectionery
    0.7% [0.0–2.8%]3 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.6%]4 studies
  • Animal feed and pet food
    0.6% [0.1–2.7%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.0–2.7%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Worn or misadjusted screens, sieves or extraction paddles in the pulping/separation stage fail to fully remove seeds, pits or skin fragments from the fruit mass, letting them pass through with the finished pulp. These fragments both downgrade or reject the pulp batch and can lodge in downstream equipment such as pumps, valves or filling nozzles, triggering sensor faults or forcing the line to stop.

How it looks in SCADA data

Engineering guidance

Quality or inspection modules log rejected/downgraded batches tied to foreign-material or seed-content checks, while downstream equipment (e.g., fillers) shows an elevated count of short unplanned stops without an associated maintenance work order. Correlation between separation-stage sensor readings (screen differential pressure, extractor torque) and the stop events supports root-cause attribution.

Countermeasure

Engineering guidance

Inspect and replace worn screens, sieves and extractor clearances on a preventive schedule, verify screen mesh size against the fruit variety, and add an online foreign-material or seed detection check before filling to catch escapes early.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 21.0 events · as reported: “Number of machines stops”
    Show verbatim quote
    Number of machines stops 32 21 -34.38%
  2. Number of events: 32.0 events · as reported: “Number of machines stops”
    Show verbatim quote
    Number of machines stops 32 21 -34.38%
  3. Defect rate: 2.70 % · as reported: “presence of seed”
    Show verbatim quote
    % of lots rejected due to presence of seeds | 2.70%
  4. Defect rate: 2.70 % · as reported: “presence of seed”
    Show verbatim quote
    % of lots rejected due to presence of seeds | 2.70%