Included study
Production Management Model to Reduce the Percentage of Rejected Products in a Food Company based on Lean Manufacturing Tools
1Bibliographic record
- Authors
- Alfredo Quintana-Lorenzo, Jimena Caceres-Belapatiño, Alberto Flores-Pérez
- Year
- 2024
- Venue
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Country
- Peru
- Segment
- Fruit and vegetable processing
- Process family
- Slaughter, cutting and primary processing
- Study type
- Simulation (input data only)
- Extraction scope
- Full text
- Size
- 1 plants · — lines · — machines
- Observation period
- —
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
The main objective of this study is to reduce the percentage of products rejected by at least 10% of a food company dedicated to the production of fruit pulp.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 3High risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Only post-intervention or only "best period" results are reported. | 0 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—Show verbatim quote (Conclusion, page 8)the percentage of rejected products, starting with a percentage of 16.27% | Process defects (scrap and rework) | Defect rate | 16.3 % | Single extractor |
bag with extra airShow verbatim quote (Table 3, page 6-7)% of lots rejected due to bag with extra air | 17% | Process defects (scrap and rework) | Defect rate | 17.0 % | Single extractor |
presence of seedpulping machineShow verbatim quote (Table 3, page 6-7)% of lots rejected due to presence of seeds | 2.70% | Process defects (scrap and rework) | Defect rate | 2.70 % | Single extractor |
bag improperly sealedsealing machineShow verbatim quote (Table 3, page 6-7)% of bags improperly sealed | 16.30% | Process defects (scrap and rework) | Defect rate | 16.3 % | Single extractor |
—Show verbatim quote (Conclusion, page 8)up to a value of 7.61% | Process defects (scrap and rework) | Defect rate | 7.61 % | Single extractor |
bag with extra airShow verbatim quote (Table 3, page 6-7)% of lots rejected due to bag with extra air | 15% | Process defects (scrap and rework) | Defect rate | 15.0 % | Single extractor |
presence of seedpulping machineShow verbatim quote (Table 3, page 6-7)% of lots rejected due to presence of seeds | 2.70% | Process defects (scrap and rework) | Defect rate | 2.70 % | Single extractor |
Observation units
- Fruit pulp production and packaging line · Whole line or unspecified equipment · Baseline
- Fruit pulp production and packaging line · Whole line or unspecified equipment · After intervention

