foratvise
Get Started
Idling and minor stops (micro-stops)

Strapping machine malfunction / minor stoppage

Idling and minor stops (micro-stops)PerformancePackaging (forming, sealing, wrapping, case packing, palletizing)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 53 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

The strapping machine that secures bundles, cases or pallets experiences short malfunctions such as strap breakage, mis-feed of the strap band, jamming of the sealing head, or misalignment of the load, which interrupts the automatic strapping cycle. These events are typically cleared quickly by the operator resetting the machine or clearing the obstruction without calling maintenance.

What is done about it

Standard countermeasures include routine preventive checks and adjustment of the strap tensioning and sealing mechanism, use of higher-quality or correctly specified strap material, operator training for quick fault clearance, and sensor or guide improvements to ensure consistent load positioning before strapping.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.0–0.8%]
Share of lost time when present
53% [41–65%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.3%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.7%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.1%]14 studies
  • Bakery and pasta
    0.6% [0.1–2.4%]6 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.4%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.5%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.5%]4 studies
  • Sugar and confectionery
    0.6% [0.1–2.3%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]8 studies
  • Animal feed and pet food
    0.6% [0.1–2.6%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The strapping machine that secures bundles, cases or pallets experiences short malfunctions such as strap breakage, mis-feed of the strap band, jamming of the sealing head, or misalignment of the load, which interrupts the automatic strapping cycle. These events are typically cleared quickly by the operator resetting the machine or clearing the obstruction without calling maintenance.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show frequent short machine-state transitions to fault or stopped on the strapping station, often with a generic alarm code (jam, strap-out, cycle fault) and no associated work order; downstream conveyor or case packer may show blocking while the strapping machine is stopped, and upstream accumulation may build up as the strapper starves the next operation.

Countermeasure

Engineering guidance

Standard countermeasures include routine preventive checks and adjustment of the strap tensioning and sealing mechanism, use of higher-quality or correctly specified strap material, operator training for quick fault clearance, and sensor or guide improvements to ensure consistent load positioning before strapping.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 192 Sec/shift · as reported: “Strapping machine”
    Show verbatim quote
    Average wasted time Per Shift (Sec/shift) 1712 - 286 192
  2. Lost time: 116 Sec/shift · as reported: “Strapping machine”
    Show verbatim quote
    Average wasted time Per Shift (Sec/shift) 0 - 152 116
  3. Lost time: 192 Minutes · as reported: “Strapping machine”
    Show verbatim quote
    Strapping machine 192 Waiting, Defects
  4. Lost time: 6.96 ton · as reported: “Strapping machine”
    Show verbatim quote
    Average waste Per Month (Ton/Month) 6.96