foratvise
Get Started
Setup and adjustments

Waiting for supervisor confirmation/authorization

Setup and adjustmentsAvailabilityWhole line or unspecified equipment

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).

What happens

During a changeover or setup step the operator must obtain explicit approval from a supervisor or quality responsible before the line can resume or proceed to the next step, and production remains paused while this organizational authorization is sought and granted. The delay is not caused by a technical fault but by the need for a human sign-off embedded in the changeover procedure.

What is done about it

Define clear escalation and response-time rules for supervisor sign-offs, use remote or mobile approval tools so confirmation can be given without the supervisor being physically present, and delegate low-risk confirmations to trained operators to reduce dependence on a single authorizing role.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.4%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
56% [44–67%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.1%]13 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.7%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.0%]11 studies
  • Bakery and pasta
    0.5% [0.1–1.9%]24 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.1%]9 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.2%]7 studies
  • Grain and oilseed milling
    0.6% [0.1–2.1%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.0%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–1.9%]5 studies
  • Animal feed and pet food
    0.8% [0.1–3.0%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

During a changeover or setup step the operator must obtain explicit approval from a supervisor or quality responsible before the line can resume or proceed to the next step, and production remains paused while this organizational authorization is sought and granted. The delay is not caused by a technical fault but by the need for a human sign-off embedded in the changeover procedure.

How it looks in SCADA data

Engineering guidance

MES/SCADA shows the line or station in a held or paused state within a changeover event, with no fault alarm active, and the stop ends only when a confirmation or release event is logged, often tied to an operator or supervisor login action. The waiting interval appears as idle time nested inside the changeover duration rather than as a discrete machine fault code.

Countermeasure

Engineering guidance

Define clear escalation and response-time rules for supervisor sign-offs, use remote or mobile approval tools so confirmation can be given without the supervisor being physically present, and delegate low-risk confirmations to trained operators to reduce dependence on a single authorizing role.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Mean event duration: 3.00 min · as reported: “Wait for supervisor confirmation”
    Show verbatim quote
    Wait for supervisor confirmation 3.00 Internal Eliminated
  2. Lost time: 3.00 min · as reported: “Wait for supervisor confirmation”
    Show verbatim quote
    Wait for supervisor confirmation 3.00