foratvise
Get Started
Equipment failure (breakdowns)

Structural failure of support rail

Equipment failure (breakdowns)AvailabilitySterilization (retort, UHT)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 34 studies that could observe it (sparse evidence).

What happens

Repeated mechanical and thermal cycling inside the sterilizer, combined with the weight of baskets or carriers and corrosive conditions, causes fatigue cracking, deformation or fracture of the support rail that guides or carries product carriers. Once the rail loses its structural integrity it can no longer hold alignment or load, leading to jamming or collapse of the transport system.

What is done about it

Apply a preventive inspection program that checks rail alignment, welds and wear points for cracking or deformation before failure occurs, and replace or reinforce rail sections showing fatigue signs. Use corrosion-resistant materials and proper load design, and verify alignment after any maintenance work on the carrier transport system.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.1% [0.2–3.2%]
Expected share of lost time
0.6% [0.1–1.8%]
Share of lost time when present
57% [46–68%]
Studies / units
34 / 37
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.2% [0.1–4.7%]5 studies
  • Soft drinks, bottled water and juices
    1.8% [0.2–7.5%]2 studies
  • Brewing, wine and spirits
    1.3% [0.1–5.2%]1 study
  • Bakery and pasta
    1.3% [0.1–5.2%]0 studies
  • Meat, poultry and seafood
    1.2% [0.1–4.9%]1 study
  • Fruit and vegetable processing
    1.2% [0.1–4.9%]2 studies
  • Grain and oilseed milling
    1.2% [0.1–4.9%]6 studies
  • Sugar and confectionery
    1.2% [0.1–5.0%]3 studies
  • Snacks, coffee, tea and other foods
    1.2% [0.1–4.5%]3 studies
  • Animal feed and pet food
    1.2% [0.1–4.6%]4 studies
  • Food manufacturing (unspecified or mixed)
    1.2% [0.1–4.6%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Repeated mechanical and thermal cycling inside the sterilizer, combined with the weight of baskets or carriers and corrosive conditions, causes fatigue cracking, deformation or fracture of the support rail that guides or carries product carriers. Once the rail loses its structural integrity it can no longer hold alignment or load, leading to jamming or collapse of the transport system.

How it looks in SCADA data

Engineering guidance

SCADA shows an unplanned stop with a mechanical fault or overload alarm on the carrier transport drive, often preceded by rising motor torque or current trend as friction increases from rail misalignment. The downstream and upstream process states show starvation or blocking around the sterilizer once the carrier path is obstructed, and the stop duration is long enough to require maintenance intervention.

Countermeasure

Engineering guidance

Apply a preventive inspection program that checks rail alignment, welds and wear points for cracking or deformation before failure occurs, and replace or reinforce rail sections showing fatigue signs. Use corrosion-resistant materials and proper load design, and verify alignment after any maintenance work on the carrier transport system.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 180 min · as reported: “Structural damage to support rail”
    Show verbatim quote
    Structural damage to support rail (180 min loss) Downtime from structural damage < 30 minutes