Tilting mechanism jam
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 53 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
The tilting slot or guide that orients or positions containers for filling binds mechanically due to misalignment, debris, worn guides or a stuck cam/actuator, so the moving part cannot complete its stroke and halts container flow at the station.
What is done about it
Clear the jammed slot, inspect and realign guides, lubricate moving parts and replace worn components; add debris detection or guarding and schedule preventive inspection of the tilting mechanism.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.3% [0.1–1.0%]
- Expected share of lost time
- 0.2% [0.0–0.5%]
- Share of lost time when present
- 53% [40–64%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.5%]18 studies
- Soft drinks, bottled water and juices0.3% [0.0–1.2%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.5%]16 studies
- Bakery and pasta0.4% [0.0–1.7%]0 studies
- Meat, poultry and seafood0.4% [0.0–1.5%]6 studies
- Fruit and vegetable processing0.4% [0.0–1.6%]4 studies
- Grain and oilseed milling0.4% [0.0–1.6%]6 studies
- Sugar and confectionery0.4% [0.0–1.7%]3 studies
- Snacks, coffee, tea and other foods0.4% [0.0–1.6%]6 studies
- Animal feed and pet food0.4% [0.0–1.7%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.6%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe tilting slot or guide that orients or positions containers for filling binds mechanically due to misalignment, debris, worn guides or a stuck cam/actuator, so the moving part cannot complete its stroke and halts container flow at the station.
How it looks in SCADA data
Engineering guidanceSCADA shows a short, recurrent stop at the filler or tilting station with the tilt actuator position sensor remaining in an intermediate or active state longer than its normal cycle time, often paired with upstream blocking and downstream starvation counters incrementing on neighbouring conveyors.
Countermeasure
Engineering guidanceClear the jammed slot, inspect and realign guides, lubricate moving parts and replace worn components; add debris detection or guarding and schedule preventive inspection of the tilting mechanism.
4Sources
- IMPLEMENTATION OF TPM ( TOTAL PRODUCTIVE MAINTENANCE) METHOD ON FILLING LINE 4 MACHINE TO REDUCE REJECTS AND DOWNTIME AT PT.XYZ (2025)Open sourceLost time: 277 min · as reported: “tilting was stuck”
Show verbatim quote
In the month February – May 2019 recorded existence minor idling downtime stop at line 4 , namely , CIP ( Cleaning In Place ) 2,509 minutes , SIP ( Sanitation In Place ) 1,943 minutes , stuck stamp on track 484 minutes , bottle stuck in the SIPA 322 divider , tilting was stuck for 277 minutes and the pallet ran out for 93 minutes .

