foratvise
Get Started
Process defects (scrap and rework)

Unfilled pouch (empty pouch defect)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 49 % of the line's lost time. Reported by 2 of the 112 studies that could observe it (limited evidence).

What happens

A pouch passes through the filling station without receiving product because the dosing valve or nozzle fails to actuate, the pouch presence sensor misdetects the pack, or the pouch is misaligned or collapsed so the fill spout cannot enter it properly. The result is a sealed or finished pouch that is empty or contains only a fraction of the intended product, which is detected as a defect downstream.

What is done about it

Inspect and maintain dosing valves, nozzles and product lines for blockages or wear, and verify calibration and positioning of pouch presence and fill-level sensors. Ensure pouch indexing, opening and registration mechanisms hold the pack correctly aligned under the fill spout, and schedule periodic checks of fill-weight feedback to catch drift before defects accumulate.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.2–2.0%]
Expected share of lost time
0.4% [0.1–1.0%]
Share of lost time when present
49% [38–62%]
Studies / units
112 / 155
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.3% [0.2–4.4%]14 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.3%]33 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.9%]14 studies
  • Bakery and pasta
    0.9% [0.1–3.3%]6 studies
  • Meat, poultry and seafood
    0.9% [0.1–3.5%]6 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.2%]4 studies
  • Grain and oilseed milling
    0.9% [0.1–3.2%]4 studies
  • Sugar and confectionery
    0.9% [0.1–3.3%]4 studies
  • Snacks, coffee, tea and other foods
    1.3% [0.2–4.2%]8 studies
  • Animal feed and pet food
    0.9% [0.1–3.1%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–2.9%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A pouch passes through the filling station without receiving product because the dosing valve or nozzle fails to actuate, the pouch presence sensor misdetects the pack, or the pouch is misaligned or collapsed so the fill spout cannot enter it properly. The result is a sealed or finished pouch that is empty or contains only a fraction of the intended product, which is detected as a defect downstream.

How it looks in SCADA data

Engineering guidance

Checkweigher or vision inspection logs a reject tagged as empty or underweight pouch without an associated machine stop, often appearing as isolated spikes in the defect counter rather than sustained downtime. Fill-weight or flow-meter signal at the dosing station reads near zero for the affected cycle while the pouch index and seal cycle continue normally, and no corresponding fault alarm is raised on the filler.

Countermeasure

Engineering guidance

Inspect and maintain dosing valves, nozzles and product lines for blockages or wear, and verify calibration and positioning of pouch presence and fill-level sensors. Ensure pouch indexing, opening and registration mechanisms hold the pack correctly aligned under the fill spout, and schedule periodic checks of fill-weight feedback to catch drift before defects accumulate.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 52.1 jam · as reported: “CIP”
    Show verbatim quote
    CIP (Jam) 52.080
  2. Number of events: 4,218 kasus · as reported: “Pouch tidak terisi”
    Show verbatim quote
    Pouch tidak terisi 4.218 15,87 92,42
  3. Defect rate: 15.9 % · as reported: “Pouch tidak terisi”
    Show verbatim quote
    Pouch tidak terisi 4.218 15,87 92,42
  4. Share of loss events: 92.4 % · as reported: “Pouch tidak terisi”
    Show verbatim quote
    Pouch tidak terisi 4.218 15,87 92,42
  5. Number of events: 4,218 units · as reported: “unfilled pouch”
    Show verbatim quote
    pouch tidak terisi sebanyak 4.218 kasus
  6. Defect rate: 15.9 % · as reported: “unfilled pouch”
    Show verbatim quote
    pouch tidak terisi sebanyak 4.218 kasus atau 15,87% dari total produksi
  7. Share of loss events: 92.4 % · as reported: “unfilled pouch”
    Show verbatim quote
    pouch tidak terisi berkontribusi sebesar 92,42%