foratvise
Get Started

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 0 of the 112 studies that could observe it (sparse evidence).

What happens

The reported figures aggregate several loss types on the case packer (total, equipment, operational and planned losses) without identifying a specific failure mode or root cause. This typically reflects a high-level OEE or loss-waterfall summary rather than a diagnosed physical event, mixing mechanical faults, operator-cleared stoppages and scheduled downtime under broad headings.

What is done about it

Implement structured downtime and reason coding at the case packer so that each stoppage is classified into a specific failure mode, minor stop cause or planned activity instead of generic buckets. Review the loss taxonomy and operator logging practices, and audit historical records to reclassify aggregate entries into actionable categories.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.2%]
Expected share of lost time
0.2% [0.0–0.7%]
Share of lost time when present
56% [45–66%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.8%]14 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.3%]33 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.7%]14 studies
  • Bakery and pasta
    0.4% [0.0–1.7%]6 studies
  • Meat, poultry and seafood
    0.5% [0.0–1.8%]6 studies
  • Fruit and vegetable processing
    0.5% [0.0–1.8%]4 studies
  • Grain and oilseed milling
    0.5% [0.0–1.8%]4 studies
  • Sugar and confectionery
    0.5% [0.0–1.9%]4 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.9%]8 studies
  • Animal feed and pet food
    0.5% [0.0–1.9%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.5% [0.0–1.8%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The reported figures aggregate several loss types on the case packer (total, equipment, operational and planned losses) without identifying a specific failure mode or root cause. This typically reflects a high-level OEE or loss-waterfall summary rather than a diagnosed physical event, mixing mechanical faults, operator-cleared stoppages and scheduled downtime under broad headings.

How it looks in SCADA data

Engineering guidance

In SCADA/MES data this appears as summary downtime totals or loss-category buckets for the caser without linked alarm codes, fault descriptors or state transitions that would allow attribution to a specific equipment or process cause. The time series shows aggregated non-productive duration counters rather than discrete event tags.

Countermeasure

Engineering guidance

Implement structured downtime and reason coding at the case packer so that each stoppage is classified into a specific failure mode, minor stop cause or planned activity instead of generic buckets. Review the loss taxonomy and operator logging practices, and audit historical records to reclassify aggregate entries into actionable categories.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 0 min · as reported: “Planned losses”
    Show verbatim quote
    Planned losses (min) 0 160 0 0 0 160 7
  2. Lost time: 53.0 min · as reported: “Operational losses”
    Show verbatim quote
    Operational losses (min) 278 494 106 53 157 1088 48
  3. Lost time: 55.0 min · as reported: “Equipment losses”
    Show verbatim quote
    Equipment losses (min) 420 364 24 55 152 1015 44.8
  4. Lost time: 108 min · as reported: “Total Losses”
    Show verbatim quote
    Total Losses(min) 698 1018 130 108 309 2263
  5. Share of lost time: 4.80 % · as reported: “Total Losses”
    Show verbatim quote
    % of Losses 30.8 45 5.8 4.8 13.7