foratvise
Get Started

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

The source report aggregates palletizer downtime and output losses into broad accounting buckets (total, equipment, operational, planned) without identifying the specific failure mode, jam, changeover or organizational event that caused each stop. The underlying physical or organizational mechanism therefore cannot be isolated from the label alone.

What is done about it

Improve the loss-reporting taxonomy and reason-code structure on the palletizer so that each stop is tagged at source with a specific cause (mechanical fault, film/strap jam, changeover, starvation, planned maintenance), enabling disaggregation of these generic buckets into actionable categories for root-cause analysis.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.6%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
56% [45–67%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.2%]14 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.4%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]14 studies
  • Bakery and pasta
    0.7% [0.1–2.6%]6 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.5%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.5%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.6%]4 studies
  • Sugar and confectionery
    0.7% [0.1–2.6%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]8 studies
  • Animal feed and pet food
    0.7% [0.1–2.5%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The source report aggregates palletizer downtime and output losses into broad accounting buckets (total, equipment, operational, planned) without identifying the specific failure mode, jam, changeover or organizational event that caused each stop. The underlying physical or organizational mechanism therefore cannot be isolated from the label alone.

How it looks in SCADA data

Engineering guidance

In SCADA/MES data this appears as time booked against generic loss-accounting codes on the palletizer asset, with aggregated downtime or speed-loss totals but no linked alarm, fault code or reason-code detail to distinguish equipment failure from adjustment, idling or planned events.

Countermeasure

Engineering guidance

Improve the loss-reporting taxonomy and reason-code structure on the palletizer so that each stop is tagged at source with a specific cause (mechanical fault, film/strap jam, changeover, starvation, planned maintenance), enabling disaggregation of these generic buckets into actionable categories for root-cause analysis.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 0 min · as reported: “Planned losses”
    Show verbatim quote
    Planned losses (min) 0 160 0 0 0 160 7
  2. Lost time: 157 min · as reported: “Operational losses”
    Show verbatim quote
    Operational losses (min) 278 494 106 53 157 1088 48
  3. Lost time: 152 min · as reported: “Equipment losses”
    Show verbatim quote
    Equipment losses (min) 420 364 24 55 152 1015 44.8
  4. Lost time: 309 min · as reported: “Total Losses”
    Show verbatim quote
    Total Losses(min) 698 1018 130 108 309 2263
  5. Share of lost time: 13.7 % · as reported: “Total Losses”
    Show verbatim quote
    % of Losses 30.8 45 5.8 4.8 13.7