foratvise
Get Started
Equipment failure (breakdowns)

Water ingress / leak from rain into equipment

Equipment failure (breakdowns)AvailabilityWhole line or unspecified equipment

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 0 of the 127 studies that could observe it (sparse evidence).

What happens

Rainwater penetrates through a degraded roof, wall penetration, or equipment enclosure seal and reaches electrical cabinets, drives, or mechanical components, causing short circuits, corrosion, or component malfunction that forces an unplanned stop.

What is done about it

Inspect and restore the integrity of roofing, flashing, and enclosure seals around the affected equipment, add drip shields or drainage, and relocate or upgrade electrical cabinets to a higher ingress protection rating with periodic sealing audits.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.1%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
58% [46–68%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.5%]13 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.5%]26 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]11 studies
  • Bakery and pasta
    0.4% [0.0–1.5%]24 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.7%]9 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.7%]7 studies
  • Grain and oilseed milling
    0.5% [0.0–1.7%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.6%]9 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.7%]5 studies
  • Animal feed and pet food
    0.4% [0.0–1.6%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.8%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Rainwater penetrates through a degraded roof, wall penetration, or equipment enclosure seal and reaches electrical cabinets, drives, or mechanical components, causing short circuits, corrosion, or component malfunction that forces an unplanned stop.

How it looks in SCADA data

Engineering guidance

Fault often coincides temporally with rainfall events and appears as an unplanned stop state with ground fault, moisture or low-insulation alarms, or erratic sensor and drive signals without any preceding wear trend; downstream stations show starvation while the affected unit remains in fault state.

Countermeasure

Engineering guidance

Inspect and restore the integrity of roofing, flashing, and enclosure seals around the affected equipment, add drip shields or drainage, and relocate or upgrade electrical cabinets to a higher ingress protection rating with periodic sealing audits.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 0 min · as reported: “Water Leak from the rain TC1”
    Show verbatim quote
    Water Leak from the rain TC1 | 0 | 0 | 0