Included study
Applying Lean Manufacturing tools to minimize waste in a mass consumption food company
1Bibliographic record
- Authors
- Lagos, Maricielo, Luis, Katsuhiro Nishizawa, Ramos, Edgar
- Year
- 2022
- Venue
- —
- DOI
- —
- Country
- Peru
- Segment
- Bakery and pasta
- Process family
- Forming, baking and cooking
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · — machines
- Observation period
- —
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
For the case study, a line is chosen where 4 types of crackers or salty cookies are produced, which we will call cookies type A, type B, type C and type D.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 10Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—Show verbatim quote (Stage IV: Analysis after improvement / Fig. 8)In the graph, the material yield of the type D biscuit had an increase from 96.7 percent to 98.9 percent. | none | Yield | 98.9 % | Both extractors agreed |
—Show verbatim quote (Stage IV: Analysis after improvement / Fig. 7)The results indicate that the OEE of the type D cookie had an increase from 83.2 percent to 86.7 percent. | none | OEE | 86.7 % | Both extractors agreed |
—Show verbatim quote (Stage IV: Analysis after improvement / Fig. 8)In the graph, the material yield of the type D biscuit had an increase from 96.7 percent to 98.9 percent. | none | Yield | 96.7 % | Both extractors agreed |
—Show verbatim quote (Stage IV: Analysis after improvement / Fig. 7)The results indicate that the OEE of the type D cookie had an increase from 83.2 percent to 86.7 percent. | none | OEE | 83.2 % | Both extractors agreed |
—Show verbatim quote (Section IV.A Main Problem)Likewise, according to the OEE, the internal target of 86.9% having an average of 84%. | none | OEE | 84.0 % | Single extractor |
—Show verbatim quote (Section IV.A Main Problem)The material performance indicator reflects that the internal objective of 99% in production during 2021 was not achieved, having an average of 97% in the production of type D biscuits. | none | Yield | 97.0 % | Single extractor |
downtimeShow verbatim quote (Section IV.B Model and tools)For the downtime that generates 35% of the waste in the production of type D biscuits, the TPM tool will be used since these downtimes are reflected in machine breakdowns, unplanned stops and minor stoppages. | Not classifiable from the report | Share of lost time | 35.0 % | Single extractor |
shrinkageShow verbatim quote (Stage III: Proposal for improvement and implementation)The second main cause of waste is shrinkage, which represents 65% of losses. | Not classifiable from the report | Share of lost time | 65.0 % | Single extractor |
poorly sealed packagesprimary packing machineShow verbatim quote (Stage III: Proposal for improvement and implementation / Fig. 6)as a result there were poorly sealed packages, generating defective products, approximately 23% of the total loss in the production of type D biscuits. | Process defects (scrap and rework) | Share of lost time | 23.0 % | Single extractor |
—Show verbatim quote (Page 4, Main Problem section)The material performance indicator reflects that the internal objective of 99% in production during 2021 was not achieved, having an average of 97% in the production of type D biscuits. | none | Availability | 97.0 % | Single extractor |
Observation units
- Type D cookie production line · Whole line or unspecified equipment · After intervention
- Type D cookie production line · Whole line or unspecified equipment · Baseline

