foratvise
Get Started
Included study

KajianKehilangan Hasil Pada Pengeringan dan Penggilingan Padi di Lahan Pasang Surut Sumatera Selatan

Open source

1Bibliographic record

Authors
Budi Raharjo, Dedeh Hadiyanti, Kgs. A. Kodir
Year
2012
Venue
Jurnal Lahan Suboptimal Journal of Suboptimal Lands
Country
Indonesia
Segment
Grain and oilseed milling
Process family
Slaughter, cutting and primary processing
Study type
Before/after intervention
Extraction scope
Abstract only
Size
1 plants · — lines · 2 machines
Observation period
—
Data collection
not_reported
Intervention
Show the setting as described by the study
The study was conducted on July 2011 (dry season) in tidal lowland reclamation area of Telang Rejo village, Muara Telang Sub-district, Banyuasin Regency.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 7High risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—Rice Milling Unit 2
Show verbatim quote (Abstract)
But, at RMU 2 milling recovery for box dryer (61.3%) was lower than sun drying (63.7%).
noneYield61.3 %Both extractors agreed
—Rice Milling Unit 2
Show verbatim quote (Abstract)
But, at RMU 2 milling recovery for box dryer (61.3%) was lower than sun drying (63.7%).
noneYield63.7 %Both extractors agreed
—Rice Milling Unit 1
Show verbatim quote (Abstract)
Field testing at RMU 1 showed that milling recovery using box dryer (63.5%) was higher than sun drying (61.6%).
noneYield63.5 %Both extractors agreed
—Rice Milling Unit 1
Show verbatim quote (Abstract)
Field testing at RMU 1 showed that milling recovery using box dryer (63.5%) was higher than sun drying (61.6%).
noneYield61.6 %Both extractors agreed
milling losses (box dryer)Rice Milling Unit
Show verbatim quote (Abstract)
For milling losses, box dryer (4.99%) was lower than sun drying (5.99%).
Process defects (scrap and rework)Defect rate4.99 %Both extractors agreed
milling losses (sun drying)Rice Milling Unit
Show verbatim quote (Abstract)
For milling losses, box dryer (4.99%) was lower than sun drying (5.99%).
Process defects (scrap and rework)Defect rate5.99 %Both extractors agreed
loss during drying (box dryer)box dryer (husk-fueled grain dryer machine)
Show verbatim quote (Abstract)
Lost during drying was 2.77 for sun drying compared to 7.13% with box dryer.
Process defects (scrap and rework)Defect rate7.13 %Both extractors agreed
loss during drying (sun drying)sun drying
Show verbatim quote (Abstract)
Lost during drying was 2.77 for sun drying compared to 7.13% with box dryer.
Process defects (scrap and rework)Defect rate2.77 %Both extractors agreed

Observation units

  • RMU 2 (box dryer) · Milling and grinding · After intervention
  • RMU 2 (sun drying) · Milling and grinding · Baseline
  • RMU 1 (box dryer) · Milling and grinding · After intervention
  • RMU 1 (sun drying) · Milling and grinding · Baseline
  • Milling losses (box dryer) · Milling and grinding · After intervention
  • Milling losses (sun drying) · Milling and grinding · Baseline
  • Grain Dryer (box dryer) · Drying · After intervention
  • Grain Dryer (sun drying) · Drying · Baseline