Included study
ANALISA PERHITUNGAN OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA PROSES AWAL PENGOLAHAN KELAPA SAWIT DI PT. PERKEBUNAN NUSANTARA IV GUNUNG BAYU
1Bibliographic record
- Authors
- Pitro Simamora, Bungaran Tambun
- Year
- 2019
- Venue
- Tapanuli Journals
- DOI
- —
- Country
- Indonesia
- Segment
- Grain and oilseed milling
- Process family
- Slaughter, cutting and primary processing
- Study type
- Single case study
- Extraction scope
- Abstract only
- Size
- 1 plants · 1 lines · 1 machines
- Observation period
- 150 days
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
PT Perkebunan Nusantara IV Gunung Bayu is a company engaged in the production of Crued Palm Oil (CPO) and kernels.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 11Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
Rework LosssterilizerShow verbatim quote (Abstract)Idling And Minor Stoppages by 0% and Rework Loss by 0% | Process defects (scrap and rework) | Share of lost time | 0 % | Both extractors agreed |
Idling And Minor StoppagessterilizerShow verbatim quote (Abstract)Idling And Minor Stoppages by 0% and Rework Loss by 0% | Idling and minor stops (micro-stops) | Share of lost time | 0 % | Both extractors agreed |
Yield / Scrap LossessterilizerShow verbatim quote (Abstract)Reduced Speed Losses by 67.54%, then Breakdown Lossses by 18.48%, Set Up and Adjustment Losses by 9.35%, Yield / Scrap Losses by 4.69 %, Idling And Minor Stoppages by 0% and Rework Loss by 0% | Process defects (scrap and rework) | Share of lost time | 4.69 % | Both extractors agreed |
Set Up and Adjustment LossessterilizerShow verbatim quote (Abstract)Reduced Speed Losses by 67.54%, then Breakdown Lossses by 18.48%, Set Up and Adjustment Losses by 9.35%, Yield / Scrap Losses by 4.69 %, Idling And Minor Stoppages by 0% and Rework Loss by 0% | Setup and adjustments | Share of lost time | 9.35 % | Both extractors agreed |
Breakdown LossessterilizerShow verbatim quote (Abstract)Reduced Speed Losses by 67.54%, then Breakdown Lossses by 18.48%, Set Up and Adjustment Losses by 9.35%, Yield / Scrap Losses by 4.69 %, Idling And Minor Stoppages by 0% and Rework Loss by 0% | Equipment failure (breakdowns) | Share of lost time | 18.5 % | Both extractors agreed |
Reduced Speed LossessterilizerShow verbatim quote (Abstract)Reduced Speed Losses by 67.54%, then Breakdown Lossses by 18.48%, Set Up and Adjustment Losses by 9.35%, Yield / Scrap Losses by 4.69 %, Idling And Minor Stoppages by 0% and Rework Loss by 0% | Reduced speed | Share of lost time | 67.5 % | Both extractors agreed |
—sterilizerShow verbatim quote (Abstract)obtained OEE values ranging from 70.11% to 88.54% | none | OEE | 70.1 % | Single extractor |
—sterilizerShow verbatim quote (Abstract)obtained OEE values ranging from 70.11% to 88.54% | none | OEE | 88.5 % | Single extractor |
Observation units
- Sterilizer · Sterilization (retort, UHT) · Baseline

