Included study
Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In
1Bibliographic record
- Authors
- Jayarullah, Rita Hartati
- Year
- 2023
- Venue
- Jurnal Inotera
- Country
- Indonesia
- Segment
- Grain and oilseed milling
- Process family
- Milling, extraction and separation
- Study type
- Reliability analysis
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · 1 machines
- Observation period
- 120 days
- Data collection
- maintenance_records
- Intervention
Show the setting as described by the study
The Ripple Mill machine is one of the must-have machines at a palm kernel processing station that serves as a palm kernel breaker to separate the shell from the palm kernel.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 8Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—Ripple Mill machineShow verbatim quote (Introduction)The number of times the number of downtime events on the Ripple Mill machine based on company data in 2022 is 32 times. | Equipment failure (breakdowns) | Number of events | 32.0 events | Single extractor |
As RotorAs Rotor (rotor shaft)Show verbatim quote (Table 4)As Rotor Wear 6 Months | Equipment failure (breakdowns) | Time between events | 6.00 Months | Single extractor |
Pipa Ripple PlateRipple Plate pipeShow verbatim quote (Table 4)Pipa Ripple Plate Broken 6 Months | Equipment failure (breakdowns) | Time between events | 6.00 Months | Single extractor |
BearingBearingShow verbatim quote (Table 4)Bearing Broken 3 Months | Equipment failure (breakdowns) | Time between events | 3.00 Months | Single extractor |
V-BeltV-BeltShow verbatim quote (Table 4)V-Belt Break 6 Months | Equipment failure (breakdowns) | Time between events | 6.00 Months | Single extractor |
As Ripple PlateAs Ripple Plate (ripple plate shaft)Show verbatim quote (Table 4)As Ripple Plate Broken 6 Months | Equipment failure (breakdowns) | Time between events | 6.00 Months | Single extractor |
Observation units
- Ripple Mill machine · Separation (centrifugation, filtration, membranes) · Baseline

