Included study
Measuring the Efficiency of Contiform Machines with the Overall Equipment Effectiveness Method at PT Tirta Investama Pandaan
1Bibliographic record
- Authors
- Beny Okistyawan, S.T Hasyim Asy'ari
- Year
- 2025
- Venue
- JKIE (Journal Knowledge Industrial Engineering)
- Country
- Indonesia
- Segment
- Soft drinks, bottled water and juices
- Process family
- Filling and packaging line
- Study type
- Single case study
- Extraction scope
- Full text
- Size
- 1 plants · — lines · 1 machines
- Observation period
- 29 days
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
The object of this study is the Contiform machine, which is a bottle forming machine from preform material with a heating and air pressure system.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 11Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—Contiform machineShow verbatim quote (Conclusion)engine availability reached 89.54%, performance of 83.55%, and quality of 98.72%. | none | Quality | 98.7 % | Both extractors agreed |
—Contiform machineShow verbatim quote (Conclusion)The results of the study showed an OEE value of 75.62%, which is still below the world class standard of 85%. | none | OEE | 75.6 % | Both extractors agreed |
—Contiform machineShow verbatim quote (Results and Discussion - Availability Ratio Calculation)The Avaibility Ratio value of the entire machine is 89.54%. | none | Availability | 89.5 % | Both extractors agreed |
—Contiform machineShow verbatim quote (Results and Discussion - Performance Ratio Value Measurement)The Performance Ratio value of the entire machine is 83.55%. | none | Performance | 83.6 % | Both extractors agreed |
Reduce SpeedContiform machineShow verbatim quote (Conclusion)The Six Big Losses analysis identified the two most dominant major losses, namely idle minor stoppage of 29.82% and reduce speed of 13.53%. | Reduced speed | Share of lost time | 13.5 % | Both extractors agreed |
Idle Minor StoppageContiform machineShow verbatim quote (Conclusion)The Six Big Losses analysis identified the two most dominant major losses, namely idle minor stoppage of 29.82% and reduce speed of 13.53%. | Idling and minor stops (micro-stops) | Share of lost time | 29.8 % | Both extractors agreed |
Observation units
- Contiform machine · Forming, moulding and depositing · Baseline

