Included study
Improving press machine efficiency using a TPM approach and Six Big Losses analysis
1Bibliographic record
- Authors
- Supriyati Supriyati, Tri Ngudi Wiyatno
- Year
- 2025
- Venue
- Journal Industrial Servicess
- Country
- —
- Segment
- Food manufacturing (unspecified or mixed)
- Process family
- Forming, baking and cooking
- Study type
- Single case study
- Extraction scope
- Abstract only
- Size
- 1 plants · — lines · 1 machines
- Observation period
- —
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
This study aims to improve the efficiency of press machines in the food manufacturing industry by implementing the Total Productive Maintenance (TPM) method and analyzing the Six Big Losses.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 6High risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—press machineShow verbatim quote (abstract)The results indicate that the average OEE is 84%, which falls below the 85% standard recommended by the Japan Institute of Plant Maintenance (JIPM). | none | OEE | 84.0 % | Both extractors agreed |
equipment failurespress machineShow verbatim quote (abstract)The primary causes of low efficiency are idling and minor stoppages (48%) and equipment failures (28%), both of which are influenced by a lack of preventive maintenance and errors in machine settings. | Equipment failure (breakdowns) | Share of lost time | 28.0 % | Both extractors agreed |
idling and minor stoppagespress machineShow verbatim quote (abstract)The primary causes of low efficiency are idling and minor stoppages (48%) and equipment failures (28%), both of which are influenced by a lack of preventive maintenance and errors in machine settings. | Idling and minor stops (micro-stops) | Share of lost time | 48.0 % | Both extractors agreed |
Observation units
- Press machine · Forming, moulding and depositing · Baseline

