Included study
ANALISIS PENGENDALIAN KUALITAS KEMASAN KARTON LIPAT (KKL) PADA PROSES PACKING SUSU BUBUK MENGGUNAKAN METODE SIX SIGMA (STUDI KASUS: PT XYZ)
1Bibliographic record
- Authors
- NIM.: 22106060043 Akhmad Rofiq Rosyiadi
- Year
- 2026
- Venue
- Digital Library UIN Sunan Kalijaga (Sunan Kalijaga State Islamic University)
- DOI
- —
- Country
- Indonesia
- Segment
- Dairy products
- Process family
- Filling and packaging line
- Study type
- Single case study
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · — machines
- Observation period
- 60 days
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
Pada kategori folding box, produk susu bubuk yang dihasilkan perusahaan dipasarkan dalam kemasan primer berupa alumunium foil yang kemudian dikemas dalam kemasan karton lipat (KKL).
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 8Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
lemShow verbatim quote (Abstrak; Bagian 4.2.3 Analyze / Gambar 4.3 Pareto Chart Reject)Terdapat tiga jenis reject yang dominan, yaitu sobek mesin (40,0%), lem (34,4%), dan penyok (22,9%). | Process defects (scrap and rework) | Share of loss events | 34.4 % | Both extractors agreed |
sobek mesinmesin perapihan alumunium foilShow verbatim quote (Abstrak; Bagian 4.2.3 Analyze / Gambar 4.3 Pareto Chart Reject)Terdapat tiga jenis reject yang dominan, yaitu sobek mesin (40,0%), lem (34,4%), dan penyok (22,9%). | Process defects (scrap and rework) | Share of loss events | 40.0 % | Both extractors agreed |
penyokShow verbatim quote (Abstrak; Bagian 4.2.3 Analyze / Gambar 4.3 Pareto Chart Reject)Terdapat tiga jenis reject yang dominan, yaitu sobek mesin (40,0%), lem (34,4%), dan penyok (22,9%). | Process defects (scrap and rework) | Share of loss events | 22.9 % | Both extractors agreed |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 6A ukuran 200 gram 2.737 263 9,609% | Process defects (scrap and rework) | Defect rate | 9.61 % | Both extractors agreed |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 3C ukuran 200 gram 3.798 84 2,212% | Process defects (scrap and rework) | Defect rate | 2.21 % | Both extractors agreed |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 3A ukuran 200 gram 2.591 78 3,010% | Process defects (scrap and rework) | Defect rate | 3.01 % | Both extractors agreed |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 2 ukuran 400 gram 2.044 182 8,904% | Process defects (scrap and rework) | Defect rate | 8.90 % | Both extractors agreed |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 3A ukuran 800 gram 1.038 112 10,790% | Process defects (scrap and rework) | Defect rate | 10.8 % | Both extractors agreed |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 7 ukuran 300 gram 2.709 226 8,343% | Process defects (scrap and rework) | Defect rate | 8.34 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 8B ukuran 90 gram 10.427 613 5,879% | Process defects (scrap and rework) | Defect rate | 5.88 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 4A ukuran 400 gram 1.947 87 4,468% | Process defects (scrap and rework) | Defect rate | 4.47 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 9 ukuran 300 gram 2.579 113 4,382% | Process defects (scrap and rework) | Defect rate | 4.38 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 1 ukuran 400 gram 1.928 73 3,786% | Process defects (scrap and rework) | Defect rate | 3.79 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 3C ukuran 800 gram 951 28 2,944% | Process defects (scrap and rework) | Defect rate | 2.94 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 10 ukuran 300 gram 10.628 303 2,851% | Process defects (scrap and rework) | Defect rate | 2.85 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 5A ukuran 800 gram 9.535 271 2,842% | Process defects (scrap and rework) | Defect rate | 2.84 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 3A ukuran 400 gram 1.925 51 2,649% | Process defects (scrap and rework) | Defect rate | 2.65 % | Single extractor |
—Show verbatim quote (Tabel 1.1 Jumlah Produksi dan Reject KKL)Varian 3C ukuran 400 gram 3.832 92 2,401% | Process defects (scrap and rework) | Defect rate | 2.40 % | Single extractor |
Observation units
- Jalur pengepakan KKL (folding box) · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline

