foratvise
Get Started
Process defects (scrap and rework)

Flexible package seal/forming defect

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 4 of the 112 studies that could observe it (limited evidence).

What happens

On vertical/horizontal form-fill-seal or wrapping equipment, variations in film tension, heat-sealer temperature, pressure or dwell time, film splice joints from reel changeovers, and misaligned forming guides or cutting/folding stations produce packages that are folded, slipped, snapped, wrinkled, dented, misaligned or that leak at the seal. Glue or adhesive application problems on the sealing station add a further source of nonconforming packs.

What is done about it

Keep seal-bar temperature, pressure and dwell time within validated setpoints with routine calibration, maintain consistent film reel tension and alignment, use splice detection to flag and discard affected sections, and perform preventive maintenance on forming guides, cutting/folding stations and glue application units. Reinforce inline vision inspection to catch and isolate each defect class before downstream accumulation.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.3% [0.4–3.0%]
Expected share of lost time
0.6% [0.2–1.5%]
Share of lost time when present
48% [37–59%]
Studies / units
112 / 155
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    2.0% [0.3–6.4%]14 studies
  • Soft drinks, bottled water and juices
    1.1% [0.2–3.2%]33 studies
  • Brewing, wine and spirits
    1.3% [0.2–4.1%]14 studies
  • Bakery and pasta
    1.5% [0.2–5.1%]6 studies
  • Meat, poultry and seafood
    1.5% [0.2–5.1%]6 studies
  • Fruit and vegetable processing
    1.5% [0.2–5.1%]4 studies
  • Grain and oilseed milling
    1.5% [0.2–5.2%]4 studies
  • Sugar and confectionery
    1.5% [0.2–5.0%]4 studies
  • Snacks, coffee, tea and other foods
    2.0% [0.3–6.1%]8 studies
  • Animal feed and pet food
    1.5% [0.2–5.0%]5 studies
  • Food manufacturing (unspecified or mixed)
    2.7% [0.4–8.1%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

On vertical/horizontal form-fill-seal or wrapping equipment, variations in film tension, heat-sealer temperature, pressure or dwell time, film splice joints from reel changeovers, and misaligned forming guides or cutting/folding stations produce packages that are folded, slipped, snapped, wrinkled, dented, misaligned or that leak at the seal. Glue or adhesive application problems on the sealing station add a further source of nonconforming packs.

How it looks in SCADA data

Engineering guidance

Vision/inspection stations log rising reject or downgrade counts broken down by defect type (fold, slip, wrinkle, leak, dent, misalignment), seal temperature/pressure traces show deviations outside the validated band, and film tension or splice-detection sensors trigger alarms correlated with the defect bursts. Short machine micro-stops may appear when operators clear jams caused by folded or misaligned film, without a maintenance work order.

Countermeasure

Engineering guidance

Keep seal-bar temperature, pressure and dwell time within validated setpoints with routine calibration, maintain consistent film reel tension and alignment, use splice detection to flag and discard affected sections, and perform preventive maintenance on forming guides, cutting/folding stations and glue application units. Reinforce inline vision inspection to catch and isolate each defect class before downstream accumulation.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 1,652 menit · as reported: “Stop Line”
    Show verbatim quote
    Total 1652 129243 16,26
  2. Share of planned time: 1.28 % · as reported: “Stop Line”
    Show verbatim quote
    Rata-rata 127,08 941,77 1,28
  3. Share of lost time: 6.35 % · as reported: “Misalignment”
    Show verbatim quote
    Misalignment 6.35% 8.77% 14.56%
  4. Share of lost time: 14.6 % · as reported: “Misalignment”
    Show verbatim quote
    Misalignment 6.35% 8.77% 14.56%
  5. Share of loss events: 34.4 % · as reported: “lem”
    Show verbatim quote
    Terdapat tiga jenis reject yang dominan, yaitu sobek mesin (40,0%), lem (34,4%), dan penyok (22,9%).
  6. Share of loss events: 22.9 % · as reported: “penyok”
    Show verbatim quote
    Terdapat tiga jenis reject yang dominan, yaitu sobek mesin (40,0%), lem (34,4%), dan penyok (22,9%).
  7. Number of events: 110 kasus · as reported: “Bocor”
    Show verbatim quote
    Bocor 110 0,41 2,41
  8. Defect rate: 0.410 % · as reported: “Bocor”
    Show verbatim quote
    Bocor 110 0,41 2,41
  9. Share of loss events: 2.41 % · as reported: “Bocor”
    Show verbatim quote
    Bocor 110 0,41 2,41
  10. Defect rate: 0.410 % · as reported: “leak”
    Show verbatim quote
    Bocor | 110 | 0,41 | 2,41
  11. Share of loss events: 2.41 % · as reported: “leak”
    Show verbatim quote
    Bocor | 110 | 0,41 | 2,41
  12. Number of events: 357 bungkus · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Data menunjukkan bahwa jenis kerusakan dengan frekuensi tertinggi selama periode Juli hingga November 2024 adalah kemasan melipat 406 bungkus, kemasan selip sebesar 357 bungkus, dan kemasan jepret sesbesar 390 bungkus.
  13. Share of loss events: 16.7 % · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
  14. Number of events: 406 bungkus · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Data menunjukkan bahwa jenis kerusakan dengan frekuensi tertinggi selama periode Juli hingga November 2024 adalah kemasan melipat 406 bungkus, kemasan selip sebesar 357 bungkus, dan kemasan jepret sesbesar 390 bungkus.
  15. Share of loss events: 17.4 % · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
  16. Share of loss events: 7.00 % · as reported: “Has a splice/joint (ada sambungan)”
    Show verbatim quote
    Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
  17. Number of events: 390 bungkus · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Data menunjukkan bahwa jenis kerusakan dengan frekuensi tertinggi selama periode Juli hingga November 2024 adalah kemasan melipat 406 bungkus, kemasan selip sebesar 357 bungkus, dan kemasan jepret sesbesar 390 bungkus.
  18. Share of loss events: 15.3 % · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
  19. Share of loss events: 7.70 % · as reported: “Random/misaligned packaging (kemasan acak)”
    Show verbatim quote
    Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
  20. Number of events: 64.0 bungkus · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Kemasan Melipat 64 151 20 33 138
  21. Number of events: 151 bungkus · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Kemasan Melipat 64 151 20 33 138
  22. Number of events: 20.0 bungkus · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Kemasan Melipat 64 151 20 33 138
  23. Number of events: 33.0 bungkus · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Kemasan Melipat 64 151 20 33 138
  24. Number of events: 138 bungkus · as reported: “Folding packaging (kemasan melipat)”
    Show verbatim quote
    Kemasan Melipat 64 151 20 33 138
  25. Number of events: 49.0 bungkus · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Kemasan Jepret 49 139 22 26 154
  26. Number of events: 139 bungkus · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Kemasan Jepret 49 139 22 26 154
  27. Number of events: 22.0 bungkus · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Kemasan Jepret 49 139 22 26 154
  28. Number of events: 26.0 bungkus · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Kemasan Jepret 49 139 22 26 154
  29. Number of events: 154 bungkus · as reported: “Snap packaging (kemasan jepret)”
    Show verbatim quote
    Kemasan Jepret 49 139 22 26 154
  30. Number of events: 57.0 bungkus · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Kemasan Selip 57 121 22 30 127
  31. Number of events: 121 bungkus · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Kemasan Selip 57 121 22 30 127
  32. Number of events: 22.0 bungkus · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Kemasan Selip 57 121 22 30 127
  33. Number of events: 30.0 bungkus · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Kemasan Selip 57 121 22 30 127
  34. Number of events: 127 bungkus · as reported: “Slip packaging (kemasan selip)”
    Show verbatim quote
    Kemasan Selip 57 121 22 30 127
  35. Number of events: 18.0 bungkus · as reported: “Random/misaligned packaging (kemasan acak)”
    Show verbatim quote
    Kemasan Acak 18 88 4 9 44
  36. Number of events: 88.0 bungkus · as reported: “Random/misaligned packaging (kemasan acak)”
    Show verbatim quote
    Kemasan Acak 18 88 4 9 44
  37. Number of events: 4.00 bungkus · as reported: “Random/misaligned packaging (kemasan acak)”
    Show verbatim quote
    Kemasan Acak 18 88 4 9 44
  38. Number of events: 9.00 bungkus · as reported: “Random/misaligned packaging (kemasan acak)”
    Show verbatim quote
    Kemasan Acak 18 88 4 9 44
  39. Number of events: 44.0 bungkus · as reported: “Random/misaligned packaging (kemasan acak)”
    Show verbatim quote
    Kemasan Acak 18 88 4 9 44
  40. Number of events: 37.0 bungkus · as reported: “Has a splice/joint (ada sambungan)”
    Show verbatim quote
    Ada Sambungan 37 99 8 5 31
  41. Number of events: 99.0 bungkus · as reported: “Has a splice/joint (ada sambungan)”
    Show verbatim quote
    Ada Sambungan 37 99 8 5 31
  42. Number of events: 8.00 bungkus · as reported: “Has a splice/joint (ada sambungan)”
    Show verbatim quote
    Ada Sambungan 37 99 8 5 31
  43. Number of events: 5.00 bungkus · as reported: “Has a splice/joint (ada sambungan)”
    Show verbatim quote
    Ada Sambungan 37 99 8 5 31
  44. Number of events: 31.0 bungkus · as reported: “Has a splice/joint (ada sambungan)”
    Show verbatim quote
    Ada Sambungan 37 99 8 5 31
  45. Number of events: 824 events · as reported: “kemasan tidak tersusun rapi (ngacak)”
    Show verbatim quote
    kemasan tidak tersusun rapi (ngacak) sebanyak 824 kejadian (17,79%)
  46. Share of loss events: 17.8 % · as reported: “kemasan tidak tersusun rapi (ngacak)”
    Show verbatim quote
    kemasan tidak tersusun rapi (ngacak) sebanyak 824 kejadian (17,79%)
  47. Number of events: 608 events · as reported: “keriput pada kemasan”
    Show verbatim quote
    keriput pada kemasan sebanyak 608 kejadian (13,12%)
  48. Share of loss events: 13.1 % · as reported: “keriput pada kemasan”
    Show verbatim quote
    keriput pada kemasan sebanyak 608 kejadian (13,12%)