Case packer / cartoner equipment failure
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 59 % of the line's lost time. Reported by 2 of the 112 studies that could observe it (sparse evidence).
What happens
A mechanical, electrical, pneumatic or control-system component of the case packer or cartoning machine (grippers, flap folders, glue system, servo drives, sensors) degrades or breaks, stopping the machine until a technician repairs or resets it. The failure interrupts the transfer of primary packs into cases or cartons, halting the packaging stage of the line.
What is done about it
Apply condition-based and preventive maintenance to wear-prone components (grippers, folding mechanisms, glue applicators, drive belts) and keep critical spares on hand to shorten repair time. Use CMMS failure history to identify recurring fault codes and redesign or upgrade the weakest subsystem.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.5%]
- Expected share of lost time
- 0.3% [0.1–0.9%]
- Share of lost time when present
- 59% [48–69%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.2%]14 studies
- Soft drinks, bottled water and juices0.8% [0.1–2.5%]33 studies
- Brewing, wine and spirits0.6% [0.1–2.2%]14 studies
- Bakery and pasta0.7% [0.1–2.5%]6 studies
- Meat, poultry and seafood0.7% [0.1–2.4%]6 studies
- Fruit and vegetable processing0.7% [0.1–2.7%]4 studies
- Grain and oilseed milling0.7% [0.1–2.5%]4 studies
- Sugar and confectionery0.7% [0.1–2.6%]4 studies
- Snacks, coffee, tea and other foods0.7% [0.1–2.4%]8 studies
- Animal feed and pet food0.7% [0.1–2.7%]5 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.3%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA mechanical, electrical, pneumatic or control-system component of the case packer or cartoning machine (grippers, flap folders, glue system, servo drives, sensors) degrades or breaks, stopping the machine until a technician repairs or resets it. The failure interrupts the transfer of primary packs into cases or cartons, halting the packaging stage of the line.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs an unplanned stop state on the case packer/cartoner with a fault or alarm code (e.g. gripper fault, glue low, servo overload) and a stop duration exceeding the minor-stop threshold, often requiring maintenance acknowledgement to clear. Upstream equipment shows blocking (back-pressure, full accumulation) while downstream equipment shows starvation during the event.
Countermeasure
Engineering guidanceApply condition-based and preventive maintenance to wear-prone components (grippers, folding mechanisms, glue applicators, drive belts) and keep critical spares on hand to shorten repair time. Use CMMS failure history to identify recurring fault codes and redesign or upgrade the weakest subsystem.
4Sources
- Number of events: 384 events · as reported: “Kolileme”
Show verbatim quote
KOLİLEME | Kolileme | 384
- Number of events: 244 events · as reported: “Kolileme”
Show verbatim quote
KOLİLEME | Kolileme | 244
- Lost time: 53.0 min · as reported: “Caser”
Show verbatim quote
Operational losses (min) | 278 | 494 | 106 | 53 | 157 | 1088 | 48
- Lost time: 55.0 min · as reported: “Caser”
Show verbatim quote
Equipment losses (min) | 420 | 364 | 24 | 55 | 152 | 1015 | 44.8

