Changeover material staging and organization
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 58 % of the line's lost time. Reported by 4 of the 112 studies that could observe it (sparse evidence).
What happens
During a changeover the operator must sort, consolidate or relocate leftover materials, components or packaging inputs from the previous production run before the new format or product can be loaded onto the packaging machine. This housekeeping and staging activity is performed while the equipment is stopped, extending the internal setup time beyond the strict tool or format change.
What is done about it
Apply external-setup practices by pre-staging and kitting the materials and components needed for the next run before the current run ends, and designate a clearly marked holding area for leftover inputs from the previous run so sorting does not occur on stopped equipment. Use changeover checklists and visual workplace organization at the packaging station to shorten the internal portion of the changeover.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.5% [0.1–1.4%]
- Expected share of lost time
- 0.3% [0.1–0.8%]
- Share of lost time when present
- 58% [46–68%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.1%]14 studies
- Soft drinks, bottled water and juices0.5% [0.1–1.7%]33 studies
- Brewing, wine and spirits0.8% [0.1–2.9%]14 studies
- Bakery and pasta0.6% [0.1–2.3%]6 studies
- Meat, poultry and seafood0.6% [0.1–2.3%]6 studies
- Fruit and vegetable processing0.6% [0.1–2.4%]4 studies
- Grain and oilseed milling0.6% [0.1–2.2%]4 studies
- Sugar and confectionery0.6% [0.1–2.2%]4 studies
- Snacks, coffee, tea and other foods0.6% [0.1–2.3%]8 studies
- Animal feed and pet food0.6% [0.1–2.3%]5 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.1%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceDuring a changeover the operator must sort, consolidate or relocate leftover materials, components or packaging inputs from the previous production run before the new format or product can be loaded onto the packaging machine. This housekeeping and staging activity is performed while the equipment is stopped, extending the internal setup time beyond the strict tool or format change.
How it looks in SCADA data
Engineering guidanceShows up as an extended changeover or setup machine-state duration on the packaging equipment, with no fault or alarm code associated, bounded by the last good pack of the previous order and the first good pack of the new order. The state log typically shows the line idle with upstream and downstream equipment also stopped or starved, and no cycling of actuators during the staging interval.
Countermeasure
Engineering guidanceApply external-setup practices by pre-staging and kitting the materials and components needed for the next run before the current run ends, and designate a clearly marked holding area for leftover inputs from the previous run so sorting does not occur on stopped equipment. Use changeover checklists and visual workplace organization at the packaging station to shorten the internal portion of the changeover.
4Sources
- Lost time: 3.00 min · as reported: “Organize inputs from previous production”
Show verbatim quote
20 Organizar insumos da produção anterior 02:15:00 02:18:00 00:03:00 00:03:00 -
- Lost time: 3.00 min · as reported: “Organize inputs from previous production”
Show verbatim quote
16 Organizar insumos da produção anterior 00:29:00 00:32:00 00:03:00 - 00:03:00
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 0 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 6 8 1.0/1.5 0.0 1.0/1.5
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 0.500 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 1 6 0.5 0.0 0.5
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 0 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 1 6 0.5 0.0 0.5
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 1.00 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 2 6 1.0 0.0 1.0
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 0 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 2 6 1.0 0.0 1.0
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 1.00 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 5 10 1.0 0.0 1.0
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 0 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 5 10 1.0 0.0 1.0
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Open sourceLost time: 1.00 min · as reported: “proactive retrieval of Format Parts”
Show verbatim quote
Line 6 8 1.0/1.5 0.0 1.0/1.5

