Changeover material staging/fetching delay
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).
What happens
During a product or batch changeover, operators must manually fetch and transport packaging components, such as caps, labelled bottles or carton boxes, from storage to the filling machine before production can resume. Because this logistics step is not performed in parallel with the previous run and is not synchronized with machine readiness, the filler sits idle while the required components are located, moved and positioned at the line.
What is done about it
Apply SMED-style decoupling of internal and external changeover tasks: pre-stage and kit the caps, bottles and cartons for the next batch at the line side while the current batch is still running, using carts, trolleys or buffer stock positioned within reach of the filler. Assign a dedicated logistics or material handler role so component fetching never blocks the line operator from restarting the machine.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.5% [0.1–1.4%]
- Expected share of lost time
- 0.3% [0.1–0.8%]
- Share of lost time when present
- 56% [43–66%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.5% [0.1–2.0%]18 studies
- Soft drinks, bottled water and juices0.5% [0.1–1.6%]44 studies
- Brewing, wine and spirits0.8% [0.1–2.9%]16 studies
- Bakery and pasta0.6% [0.1–2.5%]0 studies
- Meat, poultry and seafood0.6% [0.1–2.1%]6 studies
- Fruit and vegetable processing0.6% [0.1–2.3%]4 studies
- Grain and oilseed milling0.6% [0.1–2.2%]6 studies
- Sugar and confectionery0.6% [0.1–2.3%]3 studies
- Snacks, coffee, tea and other foods0.6% [0.1–2.2%]6 studies
- Animal feed and pet food0.6% [0.1–2.2%]4 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.1%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceDuring a product or batch changeover, operators must manually fetch and transport packaging components, such as caps, labelled bottles or carton boxes, from storage to the filling machine before production can resume. Because this logistics step is not performed in parallel with the previous run and is not synchronized with machine readiness, the filler sits idle while the required components are located, moved and positioned at the line.
How it looks in SCADA data
Engineering guidanceThe filling machine state log shows an extended changeover or idle state with no fault or alarm code active, bracketed by the last good count of the previous batch and the first good count of the new batch. Upstream material buffers or component feeders register an empty or starved condition immediately before the restart, and the gap correlates with batch or recipe switch events rather than with any mechanical stop.
Countermeasure
Engineering guidanceApply SMED-style decoupling of internal and external changeover tasks: pre-stage and kit the caps, bottles and cartons for the next batch at the line side while the current batch is still running, using carts, trolleys or buffer stock positioned within reach of the filler. Assign a dedicated logistics or material handler role so component fetching never blocks the line operator from restarting the machine.
4Sources
- Lost time: 13.0 min · as reported: “Trazer carro para mais junto das enchedoras”
Show verbatim quote
11, 13 Trazer carro para mais junto das enchedoras 13 1
- Lost time: 1.00 min · as reported: “Trazer carro para mais junto das enchedoras”
Show verbatim quote
11, 13 Trazer carro para mais junto das enchedoras 13 1
- Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry (2026)Open sourceLost time: 35.0 s · as reported: “Bringing bottle caps towards the filling machine”
Show verbatim quote
1 Bringing bottle caps towards the filling machine 35 35 -
- Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry (2026)Open sourceLost time: 65.0 s · as reported: “Switching and bringing different batch of labelled bottles towards the filling machine”
Show verbatim quote
2 Switching and bringing different batch of labelled bottles towards the filling machine 65 65 -
- Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry (2026)Open sourceLost time: 20.0 s · as reported: “Bringing carton boxes towards the filling machine”
Show verbatim quote
5 Bringing carton boxes towards the filling machine 20 - 20
- Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry (2026)Open sourceLost time: 90.0 s · as reported: “Bringing carton boxes, labelled bottles and bottle caps towards the filling machine”
Show verbatim quote
1 Bringing carton boxes, labelled bottles and bottle caps towards the filling machine 90 - 90

