foratvise
Get Started
Equipment failure (breakdowns)

Control system / software fault

Equipment failure (breakdowns)AvailabilityWhole line or unspecified equipment

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 0 of the 127 studies that could observe it (sparse evidence).

What happens

A bug, corrupted logic, communication glitch or configuration error in the PLC, HMI or supervisory software causes the control system to freeze, reset, or command an incorrect action, stopping the line or equipment without any mechanical cause. The fault is purely logical or informational rather than a wear or breakage event, so no physical part needs repair.

What is done about it

Apply rigorous software version control, validate logic changes offline before deployment, and keep a verified backup program ready for rapid restore. Implement watchdog and exception handling routines, maintain an event log for root-cause debugging, and schedule periodic review and patching of control software.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.1%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
56% [45–66%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.5% [0.0–1.9%]13 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.6%]26 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.7%]11 studies
  • Bakery and pasta
    0.4% [0.0–1.6%]24 studies
  • Meat, poultry and seafood
    0.5% [0.0–1.8%]9 studies
  • Fruit and vegetable processing
    0.5% [0.0–1.8%]7 studies
  • Grain and oilseed milling
    0.4% [0.0–1.7%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.7%]9 studies
  • Snacks, coffee, tea and other foods
    0.5% [0.0–1.8%]5 studies
  • Animal feed and pet food
    0.5% [0.0–1.8%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.7%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A bug, corrupted logic, communication glitch or configuration error in the PLC, HMI or supervisory software causes the control system to freeze, reset, or command an incorrect action, stopping the line or equipment without any mechanical cause. The fault is purely logical or informational rather than a wear or breakage event, so no physical part needs repair.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show a fault or exception code with no associated sensor deviation, repeated watchdog resets, loss of communication between nodes, or the controller state jumping directly to fault without passing through a normal transition. Operator logs often record a manual restart of the software or controller as the resolution action.

Countermeasure

Engineering guidance

Apply rigorous software version control, validate logic changes offline before deployment, and keep a verified backup program ready for rapid restore. Implement watchdog and exception handling routines, maintain an event log for root-cause debugging, and schedule periodic review and patching of control software.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 4.00 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  2. Lost time: 41.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  3. Lost time: 10.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  4. Lost time: 15.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  5. Lost time: 12.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  6. Lost time: 49.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  7. Lost time: 68.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  8. Lost time: 34.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  9. Lost time: 33.0 min · as reported: “Program/software error”
    Show verbatim quote
    Program/software error 12 34 15 0 33 68 49 12 0 4 10 41
  10. Lost time: 590 min · as reported: “Mantención Programada”
    Show verbatim quote
    Mantención Programada 590 1.60% S/29,964.12
  11. Share of lost time: 1.60 % · as reported: “Mantención Programada”
    Show verbatim quote
    Mantención Programada 590 1.60% S/29,964.12