Product jam/blockage on infeed conveyor
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 54 % of the line's lost time. Reported by 0 of the 86 studies that could observe it (sparse evidence).
What happens
Bags, pallets or other units lose correct orientation, bridge against each other or against guide rails on the conveyor feeding the packaging station, so they stop advancing and pile up until the flow is physically obstructed. This is typically triggered by uneven product shape, worn or misaligned guides, speed mismatches between conveyor sections, or minor sensor misreads that fail to stop the line before contact occurs.
What is done about it
Realign and adjust guide rails and pinch points to match the actual product envelope, synchronize conveyor section speeds to prevent accumulation, and add or recalibrate sensors to detect incipient jams before units contact. Establish a quick-clear procedure and operator checks at the infeed point, and consider anti-jam logic that pulses or reverses the conveyor on blockage detection.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.2%]
- Expected share of lost time
- 0.2% [0.0–0.7%]
- Share of lost time when present
- 54% [42–65%]
- Studies / units
- 86 / 112
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.5% [0.0–1.9%]11 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.5%]28 studies
- Brewing, wine and spirits0.4% [0.0–1.8%]12 studies
- Bakery and pasta0.5% [0.0–2.0%]0 studies
- Meat, poultry and seafood0.5% [0.0–1.8%]5 studies
- Fruit and vegetable processing0.5% [0.0–1.9%]4 studies
- Grain and oilseed milling0.5% [0.0–2.0%]4 studies
- Sugar and confectionery0.5% [0.0–1.9%]4 studies
- Snacks, coffee, tea and other foods0.5% [0.0–1.9%]4 studies
- Animal feed and pet food0.5% [0.0–1.9%]5 studies
- Food manufacturing (unspecified or mixed)0.5% [0.0–2.0%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceBags, pallets or other units lose correct orientation, bridge against each other or against guide rails on the conveyor feeding the packaging station, so they stop advancing and pile up until the flow is physically obstructed. This is typically triggered by uneven product shape, worn or misaligned guides, speed mismatches between conveyor sections, or minor sensor misreads that fail to stop the line before contact occurs.
How it looks in SCADA data
Engineering guidanceRepeated short-stop events on the conveyor section upstream of packaging, with photoeye or proximity sensor stuck in the 'blocked' state and conveyor motor current rising without a corresponding increase in throughput. Downstream packaging equipment shows starvation (idle/waiting state) while upstream units show blocking back-pressure, and the stop/restart counter for that conveyor segment increases sharply relative to other segments.
Countermeasure
Engineering guidanceRealign and adjust guide rails and pinch points to match the actual product envelope, synchronize conveyor section speeds to prevent accumulation, and add or recalibrate sensors to detect incipient jams before units contact. Establish a quick-clear procedure and operator checks at the infeed point, and consider anti-jam logic that pulses or reverses the conveyor on blockage detection.
4Sources
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Open sourceLost time: 80.0 min · as reported: “conveyor infeed”
Show verbatim quote
conveyor infeed 5 80 332 6242 99.40 99.52
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Open sourceNumber of events: 5.00 events · as reported: “conveyor infeed”
Show verbatim quote
conveyor infeed 5 80 332 6242 99.40 99.52
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 180 h · as reported: “bags stuck on conveyor before packaging”
Show verbatim quote
bags stuck on conveyor Before packaging. Bags falling in machinery. Pallet flow issues. lmoroper bag attachment. Frequent stitching adjiustments. Hour 180 40 23 16 11 Cum % 67% 82% 90% 96% 100% 180 40 23 16 11
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 23.0 h · as reported: “Pallet flow issues”
Show verbatim quote
bags stuck on conveyor Before packaging. Bags falling in machinery. Pallet flow issues. lmoroper bag attachment. Frequent stitching adjiustments. Hour 180 40 23 16 11 Cum % 67% 82% 90% 96% 100% 180 40 23 16 11
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 2,650 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 2,570 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 2,580 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 3,000 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 850 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 750 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 660 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Open sourceLost time: 730 minute · as reported: “feed bags getting stuck on the conveyor before packaging”
Show verbatim quote
2650.00 2570.00 2580.00 3000.00 850.00 750.00 660.00 730.00 0.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 3500.00 May-24 Jun-24 Jul-24 Aug-24 Sep-24 Oct-24 Nov-24 Dec-24 Food bags are attached to each conveyor before packing Before Improvement After Improvement Target 800 minute
- Optimizing Side Guard Angles on Multi-to-Single Conveyors to Minimize Infeed Stuck and Increase Overall Equipment Effectiveness (2026)Open sourceLost time: 73.1 menit · as reported: “Infeed Stuck”
Show verbatim quote
Infeed Stuck (menit) 128,0 73,1 -54,9 menit
- Optimizing Side Guard Angles on Multi-to-Single Conveyors to Minimize Infeed Stuck and Increase Overall Equipment Effectiveness (2026)Open sourceLost time: 128 menit · as reported: “Infeed Stuck”
Show verbatim quote
Infeed Stuck (menit) 128,0 73,1 -54,9 menit

