foratvise
Get Started
Process defects (scrap and rework)

Inadequate Inventory Rotation (FIFO/FEFO Failure)

Process defects (scrap and rework)QualityWhole line or unspecified equipment

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 2 of the 127 studies that could observe it (sparse evidence).

What happens

Raw materials, packaging components or intermediate stock are not managed under strict first-in-first-out or first-expired-first-out discipline, so older or near-expiry lots remain in storage while newer stock is consumed first. When the aged material is eventually used, its degraded physical, chemical or microbiological properties cause the finished product to fail specification at first pass.

What is done about it

Implement and enforce FIFO or FEFO inventory discipline supported by lot identification, barcode or RFID tracking, and periodic physical stock audits. Configure the warehouse or production planning system to flag aging stock and prioritize its release or trigger re-verification of quality before it is fed into the process.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.7%]
Share of lost time when present
48% [36–59%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.2%]13 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–1.9%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.3%]11 studies
  • Bakery and pasta
    0.6% [0.1–2.0%]24 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.4%]9 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.3%]7 studies
  • Grain and oilseed milling
    1.0% [0.1–3.5%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.3%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.4%]5 studies
  • Animal feed and pet food
    0.6% [0.1–2.2%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Raw materials, packaging components or intermediate stock are not managed under strict first-in-first-out or first-expired-first-out discipline, so older or near-expiry lots remain in storage while newer stock is consumed first. When the aged material is eventually used, its degraded physical, chemical or microbiological properties cause the finished product to fail specification at first pass.

How it looks in SCADA data

Engineering guidance

Warehouse management or ERP systems show abnormal aging profiles for stored lots and consumption sequences that do not follow receipt or expiry order. Quality inspection and MES data show elevated reject, rework or downgrade rates concentrated on specific lot numbers rather than correlating with any machine state, fault alarm or equipment counter.

Countermeasure

Engineering guidance

Implement and enforce FIFO or FEFO inventory discipline supported by lot identification, barcode or RFID tracking, and periodic physical stock audits. Configure the warehouse or production planning system to flag aging stock and prioritize its release or trigger re-verification of quality before it is fed into the process.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Defect rate: 37.0 % · as reported: “inadequate inventory rotation”
    Show verbatim quote
    Reprocessing Rate – Inventory Rotation (%) FEFO 37% (311.52 tons/year) 15% (126.3 tons/year) 12% (40 tons/year)
  2. Defect rate: 12.0 % · as reported: “inadequate inventory rotation”
    Show verbatim quote
    Reprocessing Rate – Inventory Rotation (%) FEFO 37% (311.52 tons/year) 15% (126.3 tons/year) 12% (40 tons/year)
  3. Share of lost time: 37.0 % · as reported: “inadequate inventory rotation”
    Show verbatim quote
    37% of reprocessing is associated with inadequate inventory rotation
  4. Lost time: 312 tons/year · as reported: “inadequate inventory rotation”
    Show verbatim quote
    311.52 tons/year
  5. Lost time: 40.0 tons/year · as reported: “inadequate inventory rotation”
    Show verbatim quote
    12% (40 tons/year)
  6. Lost time: 10.0 min · as reported: “Rotativa”
    Show verbatim quote
    Rotativa 1 110 161,95 € 10
  7. Number of events: 1.00 events · as reported: “Rotativa”
    Show verbatim quote
    Rotativa 1 110 161,95 € 10