foratvise
Get Started
Equipment failure (breakdowns)

Filler piston wear or failure

Equipment failure (breakdowns)AvailabilityFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).

What happens

Repeated reciprocating motion of the filling piston against its cylinder and seals causes progressive wear, scoring, or seal degradation, eventually leading to leakage, loss of dosing accuracy, or seizure that forces an unplanned stop to replace the piston or its sealing components.

What is done about it

Apply condition-based or preventive replacement of pistons and seals based on wear indicators or running hours, use wear-resistant materials and coatings, and verify dosing accuracy after reassembly before resuming production.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.0%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
57% [45–67%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.6%]18 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.3%]44 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]16 studies
  • Bakery and pasta
    0.5% [0.0–1.8%]0 studies
  • Meat, poultry and seafood
    0.5% [0.0–1.8%]6 studies
  • Fruit and vegetable processing
    0.5% [0.0–1.9%]4 studies
  • Grain and oilseed milling
    0.5% [0.0–1.8%]6 studies
  • Sugar and confectionery
    0.5% [0.0–1.8%]3 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.7%]6 studies
  • Animal feed and pet food
    0.5% [0.0–1.7%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.7%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Repeated reciprocating motion of the filling piston against its cylinder and seals causes progressive wear, scoring, or seal degradation, eventually leading to leakage, loss of dosing accuracy, or seizure that forces an unplanned stop to replace the piston or its sealing components.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show an unplanned stop on the filler station flagged as mechanical fault, often preceded by drifting fill-weight or dosing-accuracy trends and increasing torque or force readings on the piston drive before the stop, followed by an extended machine-down state coded as maintenance intervention.

Countermeasure

Engineering guidance

Apply condition-based or preventive replacement of pistons and seals based on wear indicators or running hours, use wear-resistant materials and coatings, and verify dosing accuracy after reassembly before resuming production.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 2.30 h · as reported: “Piston change”
    Show verbatim quote
    Cambio de pistón 2,30 100%
  2. Lost time: 7.00 h · as reported: “Piston, ring piston, dan liner”
    Show verbatim quote
    Piston, ring piston, dan liner | Asap putih, tenaga mesin menurun, kehilangan kompresi | Teknisi eksternal | Rp750.000 | 7 Jam 0 Menit