foratvise
Get Started
Start-up losses (reduced yield)

Product Loss in Transfer Lines

Start-up losses (reduced yield)QualityWhole line or unspecified equipment

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 3 of the 127 studies that could observe it (limited evidence).

What happens

Liquid product such as syrup or chocolate is lost as it moves between process stages because of the geometry and length of the transfer lines, residual holdup in pipes, hoses and buffer tanks, or inefficient manual handling during transfer. The product that clings to walls, remains in dead legs, or is spilled during manual pouring never reaches the downstream process as usable material.

What is done about it

Redesign transfer lines to minimize length, dead legs and holdup volume, add pigging or scraping systems to recover residual product, and automate manual transfer steps with closed piping and pumps instead of open pouring. Track and reconcile mass balances per transfer event to quantify and target the largest contributors.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.1%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
48% [29–66%]
Studies / units
127 / 161
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.1%]13 studies
  • Soft drinks, bottled water and juices
    1.1% [0.2–3.5%]26 studies
  • Brewing, wine and spirits
    1.0% [0.1–3.4%]11 studies
  • Bakery and pasta
    1.2% [0.2–3.5%]24 studies
  • Meat, poultry and seafood
    1.0% [0.1–3.2%]9 studies
  • Fruit and vegetable processing
    1.0% [0.1–3.5%]7 studies
  • Grain and oilseed milling
    1.0% [0.1–3.6%]6 studies
  • Sugar and confectionery
    1.4% [0.2–4.8%]9 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–3.4%]5 studies
  • Animal feed and pet food
    1.0% [0.1–3.4%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.9% [0.1–3.2%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Liquid product such as syrup or chocolate is lost as it moves between process stages because of the geometry and length of the transfer lines, residual holdup in pipes, hoses and buffer tanks, or inefficient manual handling during transfer. The product that clings to walls, remains in dead legs, or is spilled during manual pouring never reaches the downstream process as usable material.

How it looks in SCADA data

Engineering guidance

There is no single dedicated alarm; the loss typically appears as a mass or volume balance discrepancy between the source tank/line and the receiving tank, as short unclassified stop events logged at transfer points without a maintenance code, or as manual operator actions recorded in MES during product transfer that correlate with downstream yield shortfalls.

Countermeasure

Engineering guidance

Redesign transfer lines to minimize length, dead legs and holdup volume, add pigging or scraping systems to recover residual product, and automate manual transfer steps with closed piping and pumps instead of open pouring. Track and reconcile mass balances per transfer event to quantify and target the largest contributors.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 20,000 litre · as reported: “Transfer hattı dizaynına bağlı şurup kaybı”
    Show verbatim quote
    Böylece 1 yıllık süreç içersinde 20.000 litre şurup kaybının engellenmesi sağlanmıştır.
  2. Lost time: 57,000 litre · as reported: “Şurup transferi ve ürün hazırlamadaki kayıplar”
    Show verbatim quote
    Belirlenen bu kök nedenin yarattığı kayıp miktarı 57.000 litre olup genel kayıpların %20 sini oluşturduğu belirlenmiştir.
  3. Share of lost time: 20.0 % · as reported: “Şurup transferi ve ürün hazırlamadaki kayıplar”
    Show verbatim quote
    Belirlenen bu kök nedenin yarattığı kayıp miktarı 57.000 litre olup genel kayıpların %20 sini oluşturduğu belirlenmiştir.
  4. Lost time: 27.5 litre · as reported: “Transfer hattı dizaynına bağlı şurup kaybı”
    Show verbatim quote
    Şurup transfer hatlarından bir tanesinde her üretim başlangıç ve bitişinde transfer hattı dizaynına bağlı olarak ortalama 87.5 litrelik şurup kaybı olduğu belirlenmiş yapılan iyileştirmeler ile kayıp %69 oranında azaltılarak 27.5 litre seviyesine indirilmiştir.
  5. Mean event duration: 3.02 min · as reported: “Transfer”
    Show verbatim quote
    Transfer 3.02 2.96 2%
  6. Mean event duration: 2.96 min · as reported: “Transfer”
    Show verbatim quote
    Transfer 3.02 2.96 2%
  7. Lost time: 180 min · as reported: “manual chocolate transfer”
    Show verbatim quote
    Problem addressed: 180-minute manual transfer, temperature fluctuations, risk of spills, and WIP accumulation.