foratvise
Get Started
not classifiable

Unclassified Loss (Generic OEE Category Label Only)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 59 % of the line's lost time. Reported by 2 of the 86 studies that could observe it (limited evidence).

What happens

The labels in this cluster simply restate the names of the six OEE big-loss categories (breakdown, defect, minor stoppage, reduced speed, setup/adjustment, yield) as applied to the poultry shackle/hanging conveyor, without describing any actual physical or organisational root cause. The study authors report time or output lost at the aggregate category level for this equipment rather than identifying the specific failure mode, jam, changeover step, or defect mechanism involved.

What is done about it

Implement structured fault-code logging and reason-code entry at the hanging/shackle conveyor so that each stop, defect, slow-running period, changeover, or yield loss is tagged with a specific physical or organisational cause rather than only the generic OEE category; retrain operators and maintenance staff on consistent root-cause tagging and periodically audit the logs for completeness.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.0% [0.2–2.6%]
Expected share of lost time
0.6% [0.1–1.6%]
Share of lost time when present
59% [48–69%]
Studies / units
86 / 112
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.1% [0.1–3.9%]11 studies
  • Soft drinks, bottled water and juices
    0.9% [0.1–2.8%]28 studies
  • Brewing, wine and spirits
    1.1% [0.1–3.8%]12 studies
  • Bakery and pasta
    1.2% [0.1–4.6%]0 studies
  • Meat, poultry and seafood
    1.6% [0.2–5.7%]5 studies
  • Fruit and vegetable processing
    1.1% [0.1–4.1%]4 studies
  • Grain and oilseed milling
    1.1% [0.1–3.9%]4 studies
  • Sugar and confectionery
    1.7% [0.2–6.0%]4 studies
  • Snacks, coffee, tea and other foods
    1.1% [0.1–3.8%]4 studies
  • Animal feed and pet food
    1.1% [0.1–4.0%]5 studies
  • Food manufacturing (unspecified or mixed)
    1.1% [0.1–4.2%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The labels in this cluster simply restate the names of the six OEE big-loss categories (breakdown, defect, minor stoppage, reduced speed, setup/adjustment, yield) as applied to the poultry shackle/hanging conveyor, without describing any actual physical or organisational root cause. The study authors report time or output lost at the aggregate category level for this equipment rather than identifying the specific failure mode, jam, changeover step, or defect mechanism involved.

How it looks in SCADA data

Engineering guidance

In SCADA/MES data this appears as downtime or output being bucketed directly into the six standard OEE loss categories without any linked fault code, alarm tag, or equipment-state detail for the hanging/shackle conveyor; there is no distinguishing signal pattern because the record only carries the category name itself. Drill-down to component-level alarms, jam sensors, or changeover step logs is required to recover a real cause.

Countermeasure

Engineering guidance

Implement structured fault-code logging and reason-code entry at the hanging/shackle conveyor so that each stop, defect, slow-running period, changeover, or yield loss is tagged with a specific physical or organisational cause rather than only the generic OEE category; retrain operators and maintenance staff on consistent root-cause tagging and periodically audit the logs for completeness.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 12.5 % · as reported: “Breakdown losses”
    Show verbatim quote
    Breakdown losses 0.0192 12.5% 94%
  2. Share of lost time: 46.2 % · as reported: “Reduce speed losses”
    Show verbatim quote
    Reduce speed losses 0.0711 46.2% 46.2%
  3. Share of lost time: 6.50 % · as reported: “Idle and minor”
    Show verbatim quote
    Idle and minor 0.01 6.5% 100%
  4. Share of planned time: 0 % · as reported: “Startup defect”
    Show verbatim quote
    Rata-rata 1.92% 5.36% 1% 7.11% 0 0
  5. Share of planned time: 0 % · as reported: “Defect losses”
    Show verbatim quote
    Rata-rata 1.92% 5.36% 1% 7.11% 0 0
  6. Share of planned time: 7.11 % · as reported: “Reduce speed losses”
    Show verbatim quote
    Rata-rata 1.92% 5.36% 1% 7.11% 0 0
  7. Share of planned time: 1.00 % · as reported: “Idle and minor”
    Show verbatim quote
    Rata-rata 1.92% 5.36% 1% 7.11% 0 0
  8. Share of planned time: 5.36 % · as reported: “Setup and adjustment”
    Show verbatim quote
    Rata-rata 1.92% 5.36% 1% 7.11% 0 0
  9. Share of planned time: 1.92 % · as reported: “Breakdown losses”
    Show verbatim quote
    Rata-rata 1.92% 5.36% 1% 7.11% 0 0
  10. Share of lost time: 35.0 % · as reported: “Setup and adjustment”
    Show verbatim quote
    Setup and adjustment 0.0536 35% 81%
  11. Share of lost time: 0 % · as reported: “Defect losses”
    Show verbatim quote
    Defect losses 0 0 100%
  12. Share of lost time: 0 % · as reported: “Startup defect”
    Show verbatim quote
    Startup defect 0 0 100%
  13. Share of lost time: 10.0 % · as reported: “Setup and Adjustment Loss”
    Show verbatim quote
    Setup and Adjustment Loss 10%
  14. Share of lost time: 21.0 % · as reported: “Minor Stoppage Loss”
    Show verbatim quote
    Minor Stoppage Loss 21%
  15. Share of lost time: 18.0 % · as reported: “Reduced Speed Loss”
    Show verbatim quote
    Reduced Speed Loss 18%
  16. Share of lost time: 35.0 % · as reported: “Breakdown Loss”
    Show verbatim quote
    Breakdown Loss 35%
  17. Share of lost time: 11.0 % · as reported: “Defect Loss”
    Show verbatim quote
    Defect Loss 11%
  18. Share of lost time: 5.00 % · as reported: “Yield Loss”
    Show verbatim quote
    Yield Loss 5%