Unspecified quality or process issue
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 0 of the 127 studies that could observe it (sparse evidence).
What happens
Losses are recorded under generic labels such as quality problem, minor problem, or problem-solving effectiveness without the primary study specifying the physical equipment fault, material defect, or organizational root cause involved. The underlying mechanism therefore cannot be attributed to a single failure mode, defect type, or stoppage class, and may actually combine several of these at once.
What is done about it
Standardize the loss-reporting taxonomy so operators and engineers classify events by specific equipment, defect, or organizational cause rather than generic labels, and reinforce this through training and structured problem-solving routines. Periodic audits of the loss log against actual line events help close gaps in classification quality.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.1%]
- Expected share of lost time
- 0.2% [0.0–0.6%]
- Share of lost time when present
- 56% [44–66%]
- Studies / units
- 127 / 161
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.7%]13 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.4%]26 studies
- Brewing, wine and spirits0.4% [0.0–1.6%]11 studies
- Bakery and pasta0.4% [0.0–1.4%]24 studies
- Meat, poultry and seafood0.4% [0.0–1.7%]9 studies
- Fruit and vegetable processing0.5% [0.0–1.8%]7 studies
- Grain and oilseed milling0.4% [0.0–1.6%]6 studies
- Sugar and confectionery0.4% [0.0–1.8%]9 studies
- Snacks, coffee, tea and other foods0.4% [0.0–1.6%]5 studies
- Animal feed and pet food0.4% [0.0–1.7%]7 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.8%]10 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceLosses are recorded under generic labels such as quality problem, minor problem, or problem-solving effectiveness without the primary study specifying the physical equipment fault, material defect, or organizational root cause involved. The underlying mechanism therefore cannot be attributed to a single failure mode, defect type, or stoppage class, and may actually combine several of these at once.
How it looks in SCADA data
Engineering guidanceIn SCADA/MES records this cause appears as generic or catch-all downtime, quality, or rework codes with no associated fault code, sensor alarm, or equipment tag, and inconsistent duration or frequency patterns across occurrences. Cross-referencing with adjacent line states, operator logs, or meeting minutes is usually needed to disambiguate the entry.
Countermeasure
Engineering guidanceStandardize the loss-reporting taxonomy so operators and engineers classify events by specific equipment, defect, or organizational cause rather than generic labels, and reinforce this through training and structured problem-solving routines. Periodic audits of the loss log against actual line events help close gaps in classification quality.
4Sources
- Lost time: 3.00 h · as reported: “Problema de calidad”
Show verbatim quote
Problema de calidad 3 983 0.3% 100.0%
- Share of lost time: 0.300 % · as reported: “Problema de calidad”
Show verbatim quote
Problema de calidad 3 983 0.3% 100.0%
- Number of events: 2,284 events · as reported: “minor problems”
Show verbatim quote
a total of 2284 minor problems had been recorded, with over 95% of issues revealed in due time
- Share of loss events: 58.0 % · as reported: “problem solving sessions effectiveness”
Show verbatim quote
A total of 19 problem solving sessions with an average of two meeting per session were initiated with 58% of solving effectiveness

